BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00277768BTC
Stokta
NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1.1V 288-Pin UDIMM Kit for ASUS ProArt Z890-CREATOR WiFi
Four 16 GB DDR5 modules at 5600 MT/s CL46 1.1 V for the ASUS ProArt Z890-CREATOR WiFi motherboard
- Capacity64GB (4 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB kit with four 16 GB modules for high-capacity multitasking
- DDR5 5600 speed rated at PC5-44800 for fast data throughput
- CL46 CAS latency at 1.1 V for efficient operation
- 288-pin unbuffered non-ECC UDIMM design fits standard desktop slots
- Validated compatibility with ASUS ProArt Z890-CREATOR WiFi motherboard
ASUS ProArt Z890-CREATOR WiFi Memory Kit
This NEMIX RAM kit provides 64GB of DDR5 memory in four 16GB modules, validated for the ASUS ProArt Z890-CREATOR WiFi motherboard. It runs at 5600MHz with CL46 latency and 1.1V operation.
Suits builders needing 64GB of validated DDR5
Not suited for systems requiring ECC error correction or registered modules, and not for motherboards that do not accept 288-pin UDIMM DDR5. Buyers needing capacities above 64GB should look elsewhere.
The 288-pin DDR5 UDIMM form factor decides fit
Each module uses the standard 288-pin DDR5 UDIMM interface, so it installs only in DDR5 desktop slots. A board wired for a different generation or pin count will not accept these sticks.
Öne çıkanlar
- 64 GB kit with four 16 GB modules for high-capacity multitasking
- DDR5 5600 speed rated at PC5-44800 for fast data throughput
- CL46 CAS latency at 1.1 V for efficient operation
- 288-pin unbuffered non-ECC UDIMM design fits standard desktop slots
- Validated compatibility with ASUS ProArt Z890-CREATOR WiFi motherboard
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASUS |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Bu ürünle ilgili sorular
What DDR5 speed and data-rate does this kit run at?
The kit is rated for DDR5 5600 with a PC5-44800 data-rate, so the memory controller will operate at 5600 MT/s when XMP or EXPO is enabled.
How many 288-pin slots and how much clearance do four 16 GB modules need?
Four UDIMM modules occupy four 288-pin DDR5 slots; with no heat spreader they fit standard desktop DIMM spacing, but verify CPU cooler height before installing.
What BIOS step is often missed when installing this 1Rx8 CL46 kit on the ProArt Z890-CREATOR WiFi?
After seating all four modules, enter BIOS and enable the DDR5 5600 XMP/EXPO profile; leaving the board on auto defaults to a lower JEDEC speed.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
