Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Four green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1.1V 288-Pin UDIMM Kit for ASUS ProArt Z890-CREATOR WiFi

SKU CH-K9PM-2PRBQ

Four 16 GB DDR5 modules at 5600 MT/s CL46 1.1 V for the ASUS ProArt Z890-CREATOR WiFi motherboard

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB kit with four 16 GB modules for high-capacity multitasking
  • DDR5 5600 speed rated at PC5-44800 for fast data throughput
  • CL46 CAS latency at 1.1 V for efficient operation
  • 288-pin unbuffered non-ECC UDIMM design fits standard desktop slots
  • Validated compatibility with ASUS ProArt Z890-CREATOR WiFi motherboard

ASUS ProArt Z890-CREATOR WiFi Memory Kit

This NEMIX RAM kit provides 64GB of DDR5 memory in four 16GB modules, validated for the ASUS ProArt Z890-CREATOR WiFi motherboard. It runs at 5600MHz with CL46 latency and 1.1V operation.

Suits builders needing 64GB of validated DDR5

Not suited for systems requiring ECC error correction or registered modules, and not for motherboards that do not accept 288-pin UDIMM DDR5. Buyers needing capacities above 64GB should look elsewhere.

The 288-pin DDR5 UDIMM form factor decides fit

Each module uses the standard 288-pin DDR5 UDIMM interface, so it installs only in DDR5 desktop slots. A board wired for a different generation or pin count will not accept these sticks.

Puntos fuertes

  • 64 GB kit with four 16 GB modules for high-capacity multitasking
  • DDR5 5600 speed rated at PC5-44800 for fast data throughput
  • CL46 CAS latency at 1.1 V for efficient operation
  • 288-pin unbuffered non-ECC UDIMM design fits standard desktop slots
  • Validated compatibility with ASUS ProArt Z890-CREATOR WiFi motherboard

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemASUS
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (4 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Preguntas sobre este artículo

What DDR5 speed and data-rate does this kit run at?

The kit is rated for DDR5 5600 with a PC5-44800 data-rate, so the memory controller will operate at 5600 MT/s when XMP or EXPO is enabled.

How many 288-pin slots and how much clearance do four 16 GB modules need?

Four UDIMM modules occupy four 288-pin DDR5 slots; with no heat spreader they fit standard desktop DIMM spacing, but verify CPU cooler height before installing.

What BIOS step is often missed when installing this 1Rx8 CL46 kit on the ProArt Z890-CREATOR WiFi?

After seating all four modules, enter BIOS and enable the DDR5 5600 XMP/EXPO profile; leaving the board on auto defaults to a lower JEDEC speed.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.