Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Green 204-pin DDR3 SODIMM memory module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX PS-3416E memory upgrade

SKU CH-5BTB-7K2HH

8 GB DDR3 SODIMM running at 1333 MHz with 1.35 V low voltage for POSIFLEX PS-3416E terminals

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333 speed matches POSIFLEX PS-3416E specifications
  • Low 1.35V operation reduces system power draw
  • 204-pin SODIMM form factor fits terminal slot directly
  • CL9 latency supports responsive transaction processing

POSIFLEX PS-3416E compatible 8GB DDR3 SODIMM

This module is built for the POSIFLEX PS-3416E fanless point-of-sale terminal. It delivers 8GB of DDR3 1333 memory in a single 204-pin SODIMM, using non-ECC unbuffered chips from major OEM suppliers. The part number MS10600-828K1 identifies it within the NEMIX RAM POSIFLEX POS series.

Tool-free slot access on most POS terminals

Installation typically takes a few minutes by opening the memory compartment and pressing the SODIMM into the 204-pin slot until the clips engage. The low-profile design has no heat spreader, so it fits tight chassis clearance. The only common issue is inserting the module at an angle, which prevents the clips from locking.

Verify DDR3 1333 support and 1.35V operation

Before ordering, confirm the terminal's motherboard accepts DDR3 SODIMMs at PC3-10600 speed with CL9 latency. The system must also support 1.35V low-voltage operation; some older boards only run at 1.50V and may not recognise the module. Check the service manual for maximum capacity per slot.

Öne çıkanlar

  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333 speed matches POSIFLEX PS-3416E specifications
  • Low 1.35V operation reduces system power draw
  • 204-pin SODIMM form factor fits terminal slot directly
  • CL9 latency supports responsive transaction processing

Teknik özellikler

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Bu ürünle ilgili sorular

How do I confirm the 8GB DDR3 1333 module is recognised by the POSIFLEX PS-3416E after installation?

Power on the terminal, enter the BIOS or system information screen, and verify that total memory now shows the additional 8GB running at 1333 MHz with CL9 timings.

What comes in the package and what must I source separately for the POSIFLEX PS-3416E upgrade?

The box contains one 8GB 204-pin DDR3 SODIMM rated 1.35 V; no tools, brackets or additional cables are included.

Which specification should I match when choosing this 8GB DDR3 module for the POSIFLEX PS-3416E?

Select the 8GB 2Rx8 PC3-10600 1.35 V 204-pin non-ECC unbuffered SODIMM to match the terminal's supported configuration.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.