我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green 204-pin DDR3 SODIMM memory module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX PS-3416E memory upgrade

SKU CH-5BTB-7K2HH

8 GB DDR3 SODIMM running at 1333 MHz with 1.35 V low voltage for POSIFLEX PS-3416E terminals

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333 speed matches POSIFLEX PS-3416E specifications
  • Low 1.35V operation reduces system power draw
  • 204-pin SODIMM form factor fits terminal slot directly
  • CL9 latency supports responsive transaction processing

POSIFLEX PS-3416E compatible 8GB DDR3 SODIMM

This module is built for the POSIFLEX PS-3416E fanless point-of-sale terminal. It delivers 8GB of DDR3 1333 memory in a single 204-pin SODIMM, using non-ECC unbuffered chips from major OEM suppliers. The part number MS10600-828K1 identifies it within the NEMIX RAM POSIFLEX POS series.

Tool-free slot access on most POS terminals

Installation typically takes a few minutes by opening the memory compartment and pressing the SODIMM into the 204-pin slot until the clips engage. The low-profile design has no heat spreader, so it fits tight chassis clearance. The only common issue is inserting the module at an angle, which prevents the clips from locking.

Verify DDR3 1333 support and 1.35V operation

Before ordering, confirm the terminal's motherboard accepts DDR3 SODIMMs at PC3-10600 speed with CL9 latency. The system must also support 1.35V low-voltage operation; some older boards only run at 1.50V and may not recognise the module. Check the service manual for maximum capacity per slot.

商品特色

  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333 speed matches POSIFLEX PS-3416E specifications
  • Low 1.35V operation reduces system power draw
  • 204-pin SODIMM form factor fits terminal slot directly
  • CL9 latency supports responsive transaction processing

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

商品問答

How do I confirm the 8GB DDR3 1333 module is recognised by the POSIFLEX PS-3416E after installation?

Power on the terminal, enter the BIOS or system information screen, and verify that total memory now shows the additional 8GB running at 1333 MHz with CL9 timings.

What comes in the package and what must I source separately for the POSIFLEX PS-3416E upgrade?

The box contains one 8GB 204-pin DDR3 SODIMM rated 1.35 V; no tools, brackets or additional cables are included.

Which specification should I match when choosing this 8GB DDR3 module for the POSIFLEX PS-3416E?

Select the 8GB 2Rx8 PC3-10600 1.35 V 204-pin non-ECC unbuffered SODIMM to match the terminal's supported configuration.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。