BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00278297BTC
Stokta
NEMIX RAM
NEMIX RAM CSE-510FT-203B 32GB (2x16GB) DDR5 4800 CL40 1.1V 288-Pin UDIMM memory upgrade
32 GB DDR5 kit with two 16 GB UDIMM modules at 4800 MT/s, CL40, 1.1 V, built for SuperMicro SYS-111AD-HN2 servers
- Capacity32GB (2 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB capacity expands desktop multitasking headroom
- DDR5 4800 speed matches platform memory controller
- CL40 latency and 1.1 V voltage optimise power draw
- 288-pin UDIMM form factor fits standard desktop slots
- Two 16 GB modules enable dual-channel bandwidth
SuperMicro DDR5 4800 kit
This 32GB kit contains two 16GB DDR5 4800 modules built for SuperMicro IoT SuperServer SYS-111AD-HN2 and X13SAZ-F platforms. It runs at 1.1V with CL40 latency in a 288-pin UDIMM form factor. The memory is non-ECC and unbuffered for desktop and workstation use.
Critical spec: DDR5 4800 UDIMM
The single specification that determines fit is the DDR5 4800 UDIMM interface with 1.1V operation and CL40 timing. Modules must match this exact speed, voltage and pin layout to function in the listed SuperMicro systems. A different DDR generation or registered DIMM will not work.
Suits SuperMicro DDR5 builds
Builders upgrading the named SuperMicro IoT SuperServer or X13SAZ-F motherboard can install this kit directly. Buyers who need ECC error correction, registered modules, higher capacities or a different DDR5 speed grade should look at other memory options.
Öne çıkanlar
- 32 GB capacity expands desktop multitasking headroom
- DDR5 4800 speed matches platform memory controller
- CL40 latency and 1.1 V voltage optimise power draw
- 288-pin UDIMM form factor fits standard desktop slots
- Two 16 GB modules enable dual-channel bandwidth
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
Bu ürünle ilgili sorular
Will the 4800 MT/s speed run at that rate in my Supermicro SYS-111AD-HN2?
The kit is rated DDR5 4800 (PC5-38400). The Supermicro SYS-111AD-HN2 with X13SAZ-F board supports DDR5 4800, so the modules will operate at the rated speed.
Is this kit built to the standard 288-pin DDR5 UDIMM form factor?
Yes, each module is a 288-pin DDR5 UDIMM. That is the standard desktop/server unbuffered DIMM layout, so it fits any board with DDR5 UDIMM slots.
Does the kit need a particular slot layout or extra clearance in the CSE-510FT-203B chassis?
The kit contains two 1Rx8 UDIMMs without heat spreaders. Populate the two slots recommended in the X13SAZ-F manual; the low-profile modules clear standard CPU coolers and the CSE-510FT-203B chassis.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
