Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Two green DDR5 UDIMM sticks without heat spreaders, 32GB kit

NEMIX RAM

NEMIX RAM CSE-510FT-203B 32GB (2x16GB) DDR5 4800 CL40 1.1V 288-Pin UDIMM memory upgrade

SKU CH-HGVG-HGCDH MPN CSE-510FT-203B

32 GB DDR5 kit with two 16 GB UDIMM modules at 4800 MT/s, CL40, 1.1 V, built for SuperMicro SYS-111AD-HN2 servers

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB capacity expands desktop multitasking headroom
  • DDR5 4800 speed matches platform memory controller
  • CL40 latency and 1.1 V voltage optimise power draw
  • 288-pin UDIMM form factor fits standard desktop slots
  • Two 16 GB modules enable dual-channel bandwidth

SuperMicro DDR5 4800 kit

This 32GB kit contains two 16GB DDR5 4800 modules built for SuperMicro IoT SuperServer SYS-111AD-HN2 and X13SAZ-F platforms. It runs at 1.1V with CL40 latency in a 288-pin UDIMM form factor. The memory is non-ECC and unbuffered for desktop and workstation use.

Critical spec: DDR5 4800 UDIMM

The single specification that determines fit is the DDR5 4800 UDIMM interface with 1.1V operation and CL40 timing. Modules must match this exact speed, voltage and pin layout to function in the listed SuperMicro systems. A different DDR generation or registered DIMM will not work.

Suits SuperMicro DDR5 builds

Builders upgrading the named SuperMicro IoT SuperServer or X13SAZ-F motherboard can install this kit directly. Buyers who need ECC error correction, registered modules, higher capacities or a different DDR5 speed grade should look at other memory options.

Ciri-ciri utama

  • 32 GB capacity expands desktop multitasking headroom
  • DDR5 4800 speed matches platform memory controller
  • CL40 latency and 1.1 V voltage optimise power draw
  • 288-pin UDIMM form factor fits standard desktop slots
  • Two 16 GB modules enable dual-channel bandwidth

Spesifikasi

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT

Soalan tentang produk ini

Will the 4800 MT/s speed run at that rate in my Supermicro SYS-111AD-HN2?

The kit is rated DDR5 4800 (PC5-38400). The Supermicro SYS-111AD-HN2 with X13SAZ-F board supports DDR5 4800, so the modules will operate at the rated speed.

Is this kit built to the standard 288-pin DDR5 UDIMM form factor?

Yes, each module is a 288-pin DDR5 UDIMM. That is the standard desktop/server unbuffered DIMM layout, so it fits any board with DDR5 UDIMM slots.

Does the kit need a particular slot layout or extra clearance in the CSE-510FT-203B chassis?

The kit contains two 1Rx8 UDIMMs without heat spreaders. Populate the two slots recommended in the X13SAZ-F manual; the low-profile modules clear standard CPU coolers and the CSE-510FT-203B chassis.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.