Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Four green DDR5 RDIMM sticks, no heat spreaders, gold contacts, 288 pins each

NEMIX RAM

NEMIX RAM DDR5 512GB (4x128GB) 4800MHz CL40 ECC Registered RDIMM memory upgrade for Supermicro H14DST-FL

SKU CH-GCDJ-H9FJH

512 GB DDR5 server kit with four 128 GB registered ECC RDIMMs at 4800 MHz CL40 1.1 V for Supermicro H14DST-FL

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 512GB 4X128GB

30 yapılandırma daha gösterin

Üzeri çizili sürümler mevcuttur ancak burada stokta değildir.

Speed 4800MHz

  • 512 GB total capacity from four 128 GB modules for maximum server density
  • DDR5-4800 speed with CL40 latency delivers rated bandwidth for demanding workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 10 V operation matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor verified for the Supermicro H14DST-FL motherboard

Exact-match server memory upgrade

This 512GB kit contains four 128GB DDR5 4800MHz Registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H14DST-FL memory controller expects. The modules are recognized at full capacity and run at their rated speed without manual tuning.

For fully-populated enterprise workloads

IT teams running virtualization, databases or high-capacity compute on this specific motherboard get stable operation with every slot filled. Builders needing UDIMM or SODIMM form factors, non-ECC memory or consumer DDR5 speeds should look elsewhere because this kit uses 288-pin Registered RDIMMs only.

512GB headroom for dense VMs and datasets

Four dual-rank 2Rx4 modules at 1.1V deliver the maximum registered capacity this board supports for memory-intensive applications. Workloads that exceed 512GB total system memory or require higher frequencies than DDR5-4800 will need a different platform.

Öne çıkanlar

  • 512 GB total capacity from four 128 GB modules for maximum server density
  • DDR5-4800 speed with CL40 latency delivers rated bandwidth for demanding workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 10 V operation matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor verified for the Supermicro H14DST-FL motherboard

Teknik özellikler

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K4
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 4X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Does the Supermicro H14DST-FL motherboard need to support 2Rx4 Registered ECC DDR5 4800 RDIMMs at 1.1V for this kit to work?

Yes, the motherboard must accept 288-pin DDR5 4800 RDIMMs with CL40 timing, 1.1V voltage, 2Rx4 organization and Registered ECC so the 512GB kit is recognized at full capacity and rated speed.

Can I mix these 128GB DDR5 4800 Registered ECC modules with smaller DDR5 RDIMMs already in the server?

Mixing is possible only if the board's memory-population rules allow different capacities per channel; the manual specifies supported DIMM sizes, population order and maximum capacity per slot.

How do I verify the kit is running at DDR5 4800 CL40 with ECC active after installation?

Enter the BIOS or use a hardware-inventory tool to confirm memory speed shows 4800 MT/s, CAS latency reads 40, total capacity reports 512GB and ECC status is enabled.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.