Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap

NEMIX RAM

NEMIX RAM 256GB 2x128GB DDR5 4800 CL40 1.1V ECC RDIMM Supermicro H14DSG-OD

SKU CH-7Q79-9NAF2

256 GB DDR5 4800 CL40 ECC registered RDIMM kit (2 × 128 GB, 1.1 V, 288-pin) validated for the Supermicro H14DSG-OD motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from two 128 GB modules for high-density server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput for Supermicro H14DSG-OD
  • Registered ECC architecture corrects single-bit errors and supports full population stability
  • 1 V operation matches the motherboard's voltage requirement for reliable compatibility
  • 288-pin RDIMM form factor fits the exact slot type the board requires

Exact-match DDR5 kit

This 256GB kit contains two 128GB DDR5 4800 modules built to the precise rank, voltage and timing the Supermicro H14DSG-OD memory controller expects so the server recognises full capacity at rated speed.

Registered ECC RDIMM

The single specification that decides fitment is the 288-pin Registered ECC RDIMM form factor with 2Rx4 organisation and 1.1V operation; a UDIMM, SODIMM or different rank structure will not work in this board.

Straightforward slot install

Installation follows the motherboard manual population order for registered DIMMs; the usual issue is mixing ranks or skipping required slots which prevents the system from posting at full capacity.

Öne çıkanlar

  • 256 GB total capacity from two 128 GB modules for high-density server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput for Supermicro H14DSG-OD
  • Registered ECC architecture corrects single-bit errors and supports full population stability
  • 1 V operation matches the motherboard's voltage requirement for reliable compatibility
  • 288-pin RDIMM form factor fits the exact slot type the board requires

Teknik özellikler

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Will 4800 MT/s DDR5 run at that speed on a Supermicro H14DSG-OD?

The kit is rated DDR5-4800 (PC5-38400) with CL40 and 1.10 V. When installed in the validated H14DSG-OD platform the memory controller recognises the exact rank, voltage and timing, so it initialises at the rated 4800 MT/s without down-clocking.

Does the registered ECC design change what the DDR5 bus can deliver?

Registered (buffered) RDIMMs offload the memory controller, letting every slot run fully populated at the full 4800 MT/s rate while on-die ECC corrects single-bit errors before they reach the OS.

What physical slot and clearance does this 288-pin RDIMM need?

It uses the standard 288-pin DDR5 RDIMM form factor — no heat spreader — so it fits any DDR5 RDIMM slot on the H14DSG-OD following the board's population order.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.