暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 256GB 2x128GB DDR5 4800 CL40 1.1V ECC RDIMM Supermicro H14DSG-OD

SKU CH-7Q79-9NAF2

256 GB DDR5 4800 CL40 ECC registered RDIMM kit (2 × 128 GB, 1.1 V, 288-pin) validated for the Supermicro H14DSG-OD motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

他に 30点の構成を表示
  • 256 GB total capacity from two 128 GB modules for high-density server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput for Supermicro H14DSG-OD
  • Registered ECC architecture corrects single-bit errors and supports full population stability
  • 1 V operation matches the motherboard's voltage requirement for reliable compatibility
  • 288-pin RDIMM form factor fits the exact slot type the board requires

Exact-match DDR5 kit

This 256GB kit contains two 128GB DDR5 4800 modules built to the precise rank, voltage and timing the Supermicro H14DSG-OD memory controller expects so the server recognises full capacity at rated speed.

Registered ECC RDIMM

The single specification that decides fitment is the 288-pin Registered ECC RDIMM form factor with 2Rx4 organisation and 1.1V operation; a UDIMM, SODIMM or different rank structure will not work in this board.

Straightforward slot install

Installation follows the motherboard manual population order for registered DIMMs; the usual issue is mixing ranks or skipping required slots which prevents the system from posting at full capacity.

特長

  • 256 GB total capacity from two 128 GB modules for high-density server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput for Supermicro H14DSG-OD
  • Registered ECC architecture corrects single-bit errors and supports full population stability
  • 1 V operation matches the motherboard's voltage requirement for reliable compatibility
  • 288-pin RDIMM form factor fits the exact slot type the board requires

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will 4800 MT/s DDR5 run at that speed on a Supermicro H14DSG-OD?

The kit is rated DDR5-4800 (PC5-38400) with CL40 and 1.10 V. When installed in the validated H14DSG-OD platform the memory controller recognises the exact rank, voltage and timing, so it initialises at the rated 4800 MT/s without down-clocking.

Does the registered ECC design change what the DDR5 bus can deliver?

Registered (buffered) RDIMMs offload the memory controller, letting every slot run fully populated at the full 4800 MT/s rate while on-die ECC corrects single-bit errors before they reach the OS.

What physical slot and clearance does this 288-pin RDIMM need?

It uses the standard 288-pin DDR5 RDIMM form factor — no heat spreader — so it fits any DDR5 RDIMM slot on the H14DSG-OD following the board's population order.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。