Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

NEMIX RAM

NEMIX RAM 256GB 2x128GB DDR5 4800 CL40 1.1V ECC RDIMM Supermicro H14DSG-OD

SKU CH-7Q79-9NAF2

256 GB DDR5 4800 CL40 ECC registered RDIMM kit (2 × 128 GB, 1.1 V, 288-pin) validated for the Supermicro H14DSG-OD motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from two 128 GB modules for high-density server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput for Supermicro H14DSG-OD
  • Registered ECC architecture corrects single-bit errors and supports full population stability
  • 1 V operation matches the motherboard's voltage requirement for reliable compatibility
  • 288-pin RDIMM form factor fits the exact slot type the board requires

Exact-match DDR5 kit

This 256GB kit contains two 128GB DDR5 4800 modules built to the precise rank, voltage and timing the Supermicro H14DSG-OD memory controller expects so the server recognises full capacity at rated speed.

Registered ECC RDIMM

The single specification that decides fitment is the 288-pin Registered ECC RDIMM form factor with 2Rx4 organisation and 1.1V operation; a UDIMM, SODIMM or different rank structure will not work in this board.

Straightforward slot install

Installation follows the motherboard manual population order for registered DIMMs; the usual issue is mixing ranks or skipping required slots which prevents the system from posting at full capacity.

I korthet

  • 256 GB total capacity from two 128 GB modules for high-density server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput for Supermicro H14DSG-OD
  • Registered ECC architecture corrects single-bit errors and supports full population stability
  • 1 V operation matches the motherboard's voltage requirement for reliable compatibility
  • 288-pin RDIMM form factor fits the exact slot type the board requires

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will 4800 MT/s DDR5 run at that speed on a Supermicro H14DSG-OD?

The kit is rated DDR5-4800 (PC5-38400) with CL40 and 1.10 V. When installed in the validated H14DSG-OD platform the memory controller recognises the exact rank, voltage and timing, so it initialises at the rated 4800 MT/s without down-clocking.

Does the registered ECC design change what the DDR5 bus can deliver?

Registered (buffered) RDIMMs offload the memory controller, letting every slot run fully populated at the full 4800 MT/s rate while on-die ECC corrects single-bit errors before they reach the OS.

What physical slot and clearance does this 288-pin RDIMM need?

It uses the standard 288-pin DDR5 RDIMM form factor — no heat spreader — so it fits any DDR5 RDIMM slot on the H14DSG-OD following the board's population order.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.