SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00496341BTC
Stokta
NEMIX RAM
NEMIX RAM DDR5 5600 ECC Registered RDIMM 32GB (2x16GB) CL46 1.1V Supermicro H13SSH-E
32 GB dual-channel kit of DDR5-5600 ECC registered RDIMMs at CL46 and 1.1 V for Supermicro H13SSH-E
- Capacity32GB (2 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 32 GB capacity in a 2 x 16 GB kit for full dual-channel bandwidth
- DDR5 5600 speed rated at PC5-44800 for high-throughput server workloads
- CL46 latency at 1.1 V for stable registered operation
- ECC plus registered design corrects single-bit errors and offloads the memory controller
- Verified 288-pin RDIMM fitment for Supermicro H13SSH-E motherboard
Exact-match DDR5-5600 kit for Supermicro H13SSH-E
This 32GB kit contains two 16GB DDR5-5600 Registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H13SSH-E memory controller expects. It is intended for administrators upgrading that specific server platform with memory that will be recognised at full capacity and run at its rated speed.
Registered DDR5 limits and population rules
Registered DDR5 RDIMMs offload the memory controller so every slot can run fully populated, while on-die ECC corrects single-bit errors before they reach production workloads. The modules operate at 1.1V with CL46 latency and a 1Rx8 organisation; maximum capacity and supported population order are defined by the motherboard, not by the DIMMs themselves.
Verify board manual before ordering
Check the Supermicro H13SSH-E manual for approved DIMM population sequences, maximum capacity per channel and any BIOS version requirements before purchase. This kit is a 288-pin Registered RDIMM set; it will not fit UDIMM or SODIMM slots, and it is not suitable for systems that require unbuffered or non-ECC memory.
Öne çıkanlar
- 32 GB capacity in a 2 x 16 GB kit for full dual-channel bandwidth
- DDR5 5600 speed rated at PC5-44800 for high-throughput server workloads
- CL46 latency at 1.1 V for stable registered operation
- ECC plus registered design corrects single-bit errors and offloads the memory controller
- Verified 288-pin RDIMM fitment for Supermicro H13SSH-E motherboard
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Bu ürünle ilgili sorular
Should I pick the 2x16GB kit or a single 32GB module for the Supermicro H13SSH-E?
The kit provides two 16GB RDIMMs totalling 32GB, matching the board's 288-pin registered ECC requirements and allowing dual-channel population per the motherboard manual.
What does the 5600MHz rating mean once the kit is installed in the server?
The modules run at DDR5-5600 (PC5-44800) with CL46 latency at 1.1V, so the memory controller operates at the rated speed without downclocking when populated correctly.
Does the 288-pin RDIMM interface limit how many modules I can install?
The registered 288-pin RDIMM design offloads the memory controller, letting every supported slot run fully populated at 5600MHz while ECC corrects single-bit errors on the fly.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
