我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600 ECC Registered RDIMM 32GB (2x16GB) CL46 1.1V Supermicro H13SSH-E

SKU CH-3RTD-5V6HA

32 GB dual-channel kit of DDR5-5600 ECC registered RDIMMs at CL46 and 1.1 V for Supermicro H13SSH-E

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 32 GB capacity in a 2 x 16 GB kit for full dual-channel bandwidth
  • DDR5 5600 speed rated at PC5-44800 for high-throughput server workloads
  • CL46 latency at 1.1 V for stable registered operation
  • ECC plus registered design corrects single-bit errors and offloads the memory controller
  • Verified 288-pin RDIMM fitment for Supermicro H13SSH-E motherboard

Exact-match DDR5-5600 kit for Supermicro H13SSH-E

This 32GB kit contains two 16GB DDR5-5600 Registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H13SSH-E memory controller expects. It is intended for administrators upgrading that specific server platform with memory that will be recognised at full capacity and run at its rated speed.

Registered DDR5 limits and population rules

Registered DDR5 RDIMMs offload the memory controller so every slot can run fully populated, while on-die ECC corrects single-bit errors before they reach production workloads. The modules operate at 1.1V with CL46 latency and a 1Rx8 organisation; maximum capacity and supported population order are defined by the motherboard, not by the DIMMs themselves.

Verify board manual before ordering

Check the Supermicro H13SSH-E manual for approved DIMM population sequences, maximum capacity per channel and any BIOS version requirements before purchase. This kit is a 288-pin Registered RDIMM set; it will not fit UDIMM or SODIMM slots, and it is not suitable for systems that require unbuffered or non-ECC memory.

商品特色

  • 32 GB capacity in a 2 x 16 GB kit for full dual-channel bandwidth
  • DDR5 5600 speed rated at PC5-44800 for high-throughput server workloads
  • CL46 latency at 1.1 V for stable registered operation
  • ECC plus registered design corrects single-bit errors and offloads the memory controller
  • Verified 288-pin RDIMM fitment for Supermicro H13SSH-E motherboard

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

商品問答

Should I pick the 2x16GB kit or a single 32GB module for the Supermicro H13SSH-E?

The kit provides two 16GB RDIMMs totalling 32GB, matching the board's 288-pin registered ECC requirements and allowing dual-channel population per the motherboard manual.

What does the 5600MHz rating mean once the kit is installed in the server?

The modules run at DDR5-5600 (PC5-44800) with CL46 latency at 1.1V, so the memory controller operates at the rated speed without downclocking when populated correctly.

Does the 288-pin RDIMM interface limit how many modules I can install?

The registered 288-pin RDIMM design offloads the memory controller, letting every supported slot run fully populated at 5600MHz while ECC corrects single-bit errors on the fly.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。