Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Green rectangular DDR5 RDIMM module with black chips and gold edge contacts, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 6400 96GB 2Rx4 CL52 1.1V ECC RDIMM Supermicro X14SDW-72C-SP9F memory upgrade

SKU CH-TP9E-5FVS7

A 96GB DDR5 6400 registered ECC RDIMM built for the Supermicro X14SDW-72C-SP9F motherboard

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 96GB

4 yapılandırma daha gösterin
  • 96 GB capacity lets the Supermicro X14SDW-72C-SP9F handle large workloads
  • DDR5 6400 speed with CL52 timing delivers rated throughput for the platform
  • 2Rx4 registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the motherboard's voltage requirement for stable full-population runs
  • 288-pin RDIMM form factor fits the board's DIMM slots exactly

Exact-match DDR5 upgrade for Supermicro

This 96GB DDR5-6400 RDIMM kit is built to the precise rank, voltage and timing the Supermicro X14SDW-72C-SP9F motherboard expects. The 2Rx4 registered ECC modules operate at 1.1V with CL52 latency, so the memory controller recognises full capacity at rated speed. It is intended for administrators upgrading compatible Supermicro servers.

96GB capacity and registered ECC headroom

The kit delivers 96GB across registered DIMMs that offload the memory controller, allowing every slot to run fully populated at DDR5-6400. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads. Systems needing more memory than the board's maximum supported capacity or requiring unbuffered UDIMMs cannot use this kit.

No heat spreader and verified fitment only

Modules ship without a heat spreader, relying on server chassis airflow for cooling. The package contains only the 288-pin RDIMMs; no extra cables, software or mounting hardware are included. Fitment is verified solely for the Supermicro X14SDW-72C-SP9F motherboard; other boards require manual confirmation of population rules.

Öne çıkanlar

  • 96 GB capacity lets the Supermicro X14SDW-72C-SP9F handle large workloads
  • DDR5 6400 speed with CL52 timing delivers rated throughput for the platform
  • 2Rx4 registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the motherboard's voltage requirement for stable full-population runs
  • 288-pin RDIMM form factor fits the board's DIMM slots exactly

Teknik özellikler

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Will this 96GB DDR5 6400 RDIMM run alongside my existing DDR5 modules in the Supermicro X14SDW-72C-SP9F?

The Supermicro X14SDW-72C-SP9F memory controller expects a specific rank, voltage and timing. This module is 2Rx4 at 1.1V CL52; mixing different ranks, speeds or voltages can prevent the system from recognising full capacity or running at the rated 6400 speed.

How can I verify the module is operating at DDR5 6400 CL52 after installation?

Enter the BIOS or use a hardware-monitoring utility and confirm the memory frequency reports 6400 MT/s with CAS latency 52, the voltage reads 1.10V, and ECC is shown as active on all 96GB.

What is included in the package and is anything else required for installation?

The box contains the 96GB DDR5 6400 2Rx4 CL52 1.1V 288-pin ECC RDIMM kit. No extra cables or brackets are needed; install directly into the motherboard's DDR5 RDIMM slots following the board's population guide.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.