Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Two green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM ME25600-618K2 32GB (2×16GB) DDR4 3200 ECC UDIMM memory upgrade

SKU CH-NS08-MKRNC

32 GB dual-channel DDR4 ECC UDIMM kit at 3200 MT/s, CL22, 1.2 V, validated for Supermicro X12STE-F and X12STD-F boards

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 32GB 2X16GB

  • 32 GB dual-channel capacity from two 16 GB modules
  • ECC corrects single-bit errors to protect data integrity
  • DDR4-3200 speed with CL22 latency at 1.20 V
  • 288-pin unbuffered UDIMM fits Supermicro X12STE-F and X12STD-F
  • Lifetime replacement warranty with US-based technical support

Exact-match DDR4 ECC kit

This NEMIX RAM 32 GB kit contains two 16 GB DDR4-3200 UDIMMs built to the precise rank, voltage and timing your Supermicro X12STE-F or X12STD-F memory controller expects. The modules are recognised at full capacity and run at their rated speed without manual adjustment.

288-pin unbuffered ECC form factor

Each module is a 288-pin unbuffered ECC UDIMM with CL22 latency at 1.20 V, matching the board's memory-population rules. A registered DIMM or SODIMM will not fit or function in these slots, so the correct form factor is the single specification that decides compatibility.

Sustained error-correcting operation

Onboard ECC detects and corrects single-bit errors on the fly during continuous workloads, preventing silent data corruption and unplanned reboots. The low 1.20 V operation keeps power draw steady over long sessions without thermal throttling.

Öne çıkanlar

  • 32 GB dual-channel capacity from two 16 GB modules
  • ECC corrects single-bit errors to protect data integrity
  • DDR4-3200 speed with CL22 latency at 1.20 V
  • 288-pin unbuffered UDIMM fits Supermicro X12STE-F and X12STD-F
  • Lifetime replacement warranty with US-based technical support

Teknik özellikler

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME25600-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC UDIMM KIT

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

What does the 3200 MHz rating mean once the kit is installed in a Supermicro X12STE-F?

The modules run at DDR4 3200 (PC4-25600) with CL22 latency at 1.20 V, delivering the exact speed and timing the board's memory controller expects for full-capacity operation.

How does the 288-pin ECC UDIMM interface limit what this kit can do?

The 288-pin unbuffered ECC UDIMM form factor fits only motherboards that accept UDIMM ECC memory; it cannot be used in RDIMM or SODIMM slots, and the board must support 1Rx8 rank population rules.

What physical clearance does the 2×16 GB kit need to fit the motherboard?

Each 288-pin UDIMM is a standard-height module without a heat spreader, so it fits the regular DIMM slots on the Supermicro X12STE-F or X12STD-F without interfering with CPU coolers or chassis walls.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.