Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM ME25600-618K2 32GB (2×16GB) DDR4 3200 ECC UDIMM memory upgrade

SKU CH-NS08-MKRNC

32 GB dual-channel DDR4 ECC UDIMM kit at 3200 MT/s, CL22, 1.2 V, validated for Supermicro X12STE-F and X12STD-F boards

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 32GB 2X16GB

  • 32 GB dual-channel capacity from two 16 GB modules
  • ECC corrects single-bit errors to protect data integrity
  • DDR4-3200 speed with CL22 latency at 1.20 V
  • 288-pin unbuffered UDIMM fits Supermicro X12STE-F and X12STD-F
  • Lifetime replacement warranty with US-based technical support

Exact-match DDR4 ECC kit

This NEMIX RAM 32 GB kit contains two 16 GB DDR4-3200 UDIMMs built to the precise rank, voltage and timing your Supermicro X12STE-F or X12STD-F memory controller expects. The modules are recognised at full capacity and run at their rated speed without manual adjustment.

288-pin unbuffered ECC form factor

Each module is a 288-pin unbuffered ECC UDIMM with CL22 latency at 1.20 V, matching the board's memory-population rules. A registered DIMM or SODIMM will not fit or function in these slots, so the correct form factor is the single specification that decides compatibility.

Sustained error-correcting operation

Onboard ECC detects and corrects single-bit errors on the fly during continuous workloads, preventing silent data corruption and unplanned reboots. The low 1.20 V operation keeps power draw steady over long sessions without thermal throttling.

Prednosti

  • 32 GB dual-channel capacity from two 16 GB modules
  • ECC corrects single-bit errors to protect data integrity
  • DDR4-3200 speed with CL22 latency at 1.20 V
  • 288-pin unbuffered UDIMM fits Supermicro X12STE-F and X12STD-F
  • Lifetime replacement warranty with US-based technical support

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME25600-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC UDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What does the 3200 MHz rating mean once the kit is installed in a Supermicro X12STE-F?

The modules run at DDR4 3200 (PC4-25600) with CL22 latency at 1.20 V, delivering the exact speed and timing the board's memory controller expects for full-capacity operation.

How does the 288-pin ECC UDIMM interface limit what this kit can do?

The 288-pin unbuffered ECC UDIMM form factor fits only motherboards that accept UDIMM ECC memory; it cannot be used in RDIMM or SODIMM slots, and the board must support 1Rx8 rank population rules.

What physical clearance does the 2×16 GB kit need to fit the motherboard?

Each 288-pin UDIMM is a standard-height module without a heat spreader, so it fits the regular DIMM slots on the Supermicro X12STE-F or X12STD-F without interfering with CPU coolers or chassis walls.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.