Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Two green circuit boards with gold contacts and black chips, no heat spreaders

NEMIX RAM

NEMIX RAM MR44800-4828K2 96GB (2x48GB) DDR5 5600 CL46 ECC Registered RDIMM memory upgrade

SKU CH-TN22-KTY4C

A 96GB DDR5 registered ECC RDIMM kit (2×48GB) at 5600MHz CL46, 1.10V, verified for the GIGABYTE MA34-CP0 motherboard

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

24 yapılandırma daha gösterin
  • 96 GB total capacity from two 48 GB modules for dense server memory configurations
  • DDR5 5600 MT/s speed rated at PC5-44800 for high-throughput workloads
  • Registered ECC design with 2Rx8 organisation corrects single-bit errors and stabilises fully populated slots
  • CL46 CAS latency at 1.1 V operation matches the motherboard memory controller expectations
  • 288-pin RDIMM form factor verified compatible with the GIGABYTE MA34-CP0 motherboard

Exact-match DDR5 kit for GIGABYTE MA34-CP0

This 96 GB kit delivers two 48 GB DDR5 5600 registered ECC RDIMMs built to the board's exact rank, voltage and timing requirements. The 2Rx8 organisation and 1.1 V operation let the memory controller recognise full capacity and run at the rated 5600 MT/s without manual tuning. It targets administrators who need a drop-in upgrade for this specific server platform.

Replaces mismatched or undersized DIMMs

When existing modules are slower, unbuffered or only partially populate the board, this kit restores the registered architecture the platform expects and enables full-slot operation at the native PC5-44800 data rate. The jump is worth it when the workload demands ECC protection and the motherboard's qualified-vendor list calls for 288-pin RDIMMs at CL46. Builders using UDIMM slots or a different chipset cannot use these modules.

Sustained-load stability with registered ECC

Registered buffering offloads the memory controller so every slot remains stable at full population during continuous operation, while on-die ECC corrects single-bit errors in real time to prevent silent data corruption. The CL46 latency and 1.1 V supply are maintained across extended runs without the voltage drift that can appear on unbuffered alternatives. No heat spreader is fitted, so airflow in the chassis must be sufficient for the bare DRAM packages.

Öne çıkanlar

  • 96 GB total capacity from two 48 GB modules for dense server memory configurations
  • DDR5 5600 MT/s speed rated at PC5-44800 for high-throughput workloads
  • Registered ECC design with 2Rx8 organisation corrects single-bit errors and stabilises fully populated slots
  • CL46 CAS latency at 1.1 V operation matches the motherboard memory controller expectations
  • 288-pin RDIMM form factor verified compatible with the GIGABYTE MA34-CP0 motherboard

Teknik özellikler

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Will these 288-pin DDR5 RDIMM modules fit the GIGABYTE MA34-CP0 motherboard slots?

Yes. The kit uses the 288-pin RDIMM form factor that the MA34-CP0 requires; it is not a UDIMM or SODIMM and matches the board's DDR5 5600 specification.

What is the correct population order when installing both 48 GB modules on the MA34-CP0?

Consult the motherboard manual for the approved DIMM population sequence; the kit is spec-matched to the board's rules, but the exact slot order varies by platform and must be followed.

Do the modules need any firmware updates or thermal-pad replacements during their service life?

No firmware updates or thermal-pad changes are required; the RDIMMs have no heat spreader and operate at the rated 1.1 V with ECC and registered buffering for long-term stability.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.