Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Green circuit board with black memory chips, gold edge connector, thin rectangular SODIMM shape

OWC

OWC 16GB DDR4 2400MHz CL17 1.2V 260pin SODIMM for HP ProDesk 400 G3 Mini 600 G3 Mini

SKU CH-SVNX-ZS4PJ

16 GB DDR4 2400 MHz CL17 SODIMM upgrades HP ProDesk 400 G3 Mini and 600 G3 Mini systems

  • Capacity16GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCNo
  • 16 GB capacity lets you run more apps and larger files at once
  • DDR4 2400 MHz CL17 speed delivers responsive system performance
  • 2 V low voltage reduces power draw and heat in compact Mini desktops
  • 260-pin SODIMM form factor fits HP ProDesk 400 G3 Mini and 600 G3 Mini slots
  • JEDEC and RoHS compliant for a warranty-safe, standards-based upgrade

16GB DDR4 SODIMM for HP ProDesk Mini

This 16GB DDR4 SODIMM module is built for the HP ProDesk 400 G3 Mini and 600 G3 Mini. It runs at 2400MHz with CL17 latency at 1.2V. The unbuffered, non-ECC design uses a 260-pin layout and 2Rx8 rank configuration. It meets JEDEC standards and is tested for full compatibility with these specific systems.

Suits Mini desktops needing 16GB single sticks.

This module suits owners of the listed HP ProDesk Mini models who want a straightforward 16GB capacity increase. It is not for systems that require ECC error correction or registered memory. Builders needing higher speeds than 2400MHz or capacities beyond a single 16GB stick should look at other options.

2400MHz DDR4 speed confirms fit

The decisive specification is the DDR4 2400MHz (PC4-19200) rating. Your HP ProDesk 400 G3 Mini or 600 G3 Mini must support this speed for the module to operate correctly. The 260-pin SODIMM form factor and 1.2V voltage are also fixed requirements for these machines.

Öne çıkanlar

  • 16 GB capacity lets you run more apps and larger files at once
  • DDR4 2400 MHz CL17 speed delivers responsive system performance
  • 2 V low voltage reduces power draw and heat in compact Mini desktops
  • 260-pin SODIMM form factor fits HP ProDesk 400 G3 Mini and 600 G3 Mini slots
  • JEDEC and RoHS compliant for a warranty-safe, standards-based upgrade

Teknik özellikler

BrandOWC
Part Number2S4D42R816GB
Capacity16GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ProDesk 400 G3 Mini
HP ProDesk 600 G3 Mini

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Does the 260-pin DDR4 SODIMM arrive alone or with any extra parts?

The module ships by itself; no additional brackets, tools or cables are included.

Should I pick the 16 GB CL17 stick or a different capacity for my HP ProDesk 400 G3 Mini?

The 16 GB CL17 2400 MHz stick matches the system's supported speed and form factor; choose it when you need a single-slot upgrade to the maximum per slot.

Will the 2400 MHz rating actually run at that speed once installed in the 600 G3 Mini?

The Mini's memory controller negotiates JEDEC timings, so the module will operate at 2400 MHz CL17 at 1.2 V without BIOS changes.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.