OWC 16GB DDR4 2133MHz CL15 1.2V 288-pin Non-ECC UDIMM memory upgrade
- 16GB
- 288-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
16 GB DDR4 2400 MHz CL17 SODIMM upgrades HP ProDesk 400 G3 Mini and 600 G3 Mini systems
This 16GB DDR4 SODIMM module is built for the HP ProDesk 400 G3 Mini and 600 G3 Mini. It runs at 2400MHz with CL17 latency at 1.2V. The unbuffered, non-ECC design uses a 260-pin layout and 2Rx8 rank configuration. It meets JEDEC standards and is tested for full compatibility with these specific systems.
This module suits owners of the listed HP ProDesk Mini models who want a straightforward 16GB capacity increase. It is not for systems that require ECC error correction or registered memory. Builders needing higher speeds than 2400MHz or capacities beyond a single 16GB stick should look at other options.
The decisive specification is the DDR4 2400MHz (PC4-19200) rating. Your HP ProDesk 400 G3 Mini or 600 G3 Mini must support this speed for the module to operate correctly. The 260-pin SODIMM form factor and 1.2V voltage are also fixed requirements for these machines.
| Brand | OWC |
|---|---|
| Part Number | 2S4D42R816GB |
| Capacity | 16GB |
| Type | 260-Pin DDR4 Non-ECC SODIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | HP ProDesk 400 G3 Mini HP ProDesk 600 G3 Mini |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The module ships by itself; no additional brackets, tools or cables are included.
The 16 GB CL17 2400 MHz stick matches the system's supported speed and form factor; choose it when you need a single-slot upgrade to the maximum per slot.
The Mini's memory controller negotiates JEDEC timings, so the module will operate at 2400 MHz CL17 at 1.2 V without BIOS changes.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟