OWC 16GB DDR4 2133MHz CL15 1.2V 288pin Non-ECC UDIMM memory upgrade
- 16GB
- 288-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
16GB DDR4 2400MHz CL17 SODIMM memory upgrade for HP EliteOne 1000 G1 and 800 G3
This 16 GB DDR4 2400 MHz CL17 module is built for the HP EliteOne 1000 G1 and EliteOne 800 G3 all-in-one PCs. It uses the standard 260-pin SODIMM form factor, runs at 1.2 V, and is non-ECC unbuffered memory. The kit is fully JEDEC compliant and RoHS compliant, making it a warranty-safe upgrade for those specific systems.
The module replaces the factory-installed memory in compatible EliteOne units, adding 16 GB in a single slot. It is backward compatible with 2133 MHz DDR4, so it will downclock automatically if the system requires it. The jump is worth it when the original configuration has less than 16 GB total or runs at a lower speed, giving headroom for larger workloads and smoother multitasking.
This upgrade suits IT managers and users who need a straightforward capacity increase for the HP EliteOne 1000 G1 or 800 G3. It is not for systems that require ECC or registered DIMMs, nor for platforms that use a different pin count or voltage. Buyers with other laptop, mini-desktop or NAS hardware should verify their exact model specifications before purchasing.
| Brand | OWC |
|---|---|
| Part Number | 2S4D42R816GB |
| Capacity | 16GB |
| Type | 260-Pin DDR4 Non-ECC SODIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | HP EliteOne 1000 G1 HP EliteOne 800 G3 |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Yes, the module uses the standard 260-pin DDR4 SODIMM form factor required by the HP EliteOne 1000 G1 and 800 G3 systems listed in the compatibility data.
Align the notch on the module's gold edge with the key in the slot, insert at a slight angle, then press down firmly until both side clips click into place; the step often missed is verifying both clips have fully engaged.
No firmware updates are needed for the memory itself, and the module has no moving parts or heat spreader to wear out; it is designed to last the lifetime of the system under normal use.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟