OWC 16GB DDR4 2133MHz CL15 1.2V 288pin Non-ECC UDIMM memory upgrade
- 16GB
- 288-Pin DDR4 Non-EC…
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
OWC
16GB DDR4 2400MHz CL17 SODIMM memory upgrade for HP EliteOne 1000 G1 and 800 G3
This 16 GB DDR4 2400 MHz CL17 module is built for the HP EliteOne 1000 G1 and EliteOne 800 G3 all-in-one PCs. It uses the standard 260-pin SODIMM form factor, runs at 1.2 V, and is non-ECC unbuffered memory. The kit is fully JEDEC compliant and RoHS compliant, making it a warranty-safe upgrade for those specific systems.
The module replaces the factory-installed memory in compatible EliteOne units, adding 16 GB in a single slot. It is backward compatible with 2133 MHz DDR4, so it will downclock automatically if the system requires it. The jump is worth it when the original configuration has less than 16 GB total or runs at a lower speed, giving headroom for larger workloads and smoother multitasking.
This upgrade suits IT managers and users who need a straightforward capacity increase for the HP EliteOne 1000 G1 or 800 G3. It is not for systems that require ECC or registered DIMMs, nor for platforms that use a different pin count or voltage. Buyers with other laptop, mini-desktop or NAS hardware should verify their exact model specifications before purchasing.
| Brand | OWC |
|---|---|
| Part Number | 2S4D42R816GB |
| Capacity | 16GB |
| Type | 260-Pin DDR4 Non-ECC SODIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | HP EliteOne 1000 G1 HP EliteOne 800 G3 |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
Yes, the module uses the standard 260-pin DDR4 SODIMM form factor required by the HP EliteOne 1000 G1 and 800 G3 systems listed in the compatibility data.
Align the notch on the module's gold edge with the key in the slot, insert at a slight angle, then press down firmly until both side clips click into place; the step often missed is verifying both clips have fully engaged.
No firmware updates are needed for the memory itself, and the module has no moving parts or heat spreader to wear out; it is designed to last the lifetime of the system under normal use.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?