Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black memory chips, gold edge connector, no heat spreader

OWC

OWC 16GB DDR4 2400MHz CL17 1.2V 260pin SODIMM memory upgrade

SKU CH-KW6A-5WCPW

16GB DDR4 2400MHz CL17 SODIMM memory upgrade for HP EliteOne 1000 G1 and 800 G3

  • Capacity16GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCNo
  • 16 GB DDR4 boosts multitasking on HP EliteOne 1000 G1 and 800 G3
  • 2400 MHz CL17 speed matches system spec for stable performance
  • 2 V low voltage reduces power draw and heat
  • 260-pin SODIMM form factor fits laptop and mini-desktop slots
  • JEDEC and RoHS compliant for warranty-safe upgrade

System-specific DDR4 SODIMM for HP EliteOne

This 16 GB DDR4 2400 MHz CL17 module is built for the HP EliteOne 1000 G1 and EliteOne 800 G3 all-in-one PCs. It uses the standard 260-pin SODIMM form factor, runs at 1.2 V, and is non-ECC unbuffered memory. The kit is fully JEDEC compliant and RoHS compliant, making it a warranty-safe upgrade for those specific systems.

Upgrading from lower-capacity or slower DDR4

The module replaces the factory-installed memory in compatible EliteOne units, adding 16 GB in a single slot. It is backward compatible with 2133 MHz DDR4, so it will downclock automatically if the system requires it. The jump is worth it when the original configuration has less than 16 GB total or runs at a lower speed, giving headroom for larger workloads and smoother multitasking.

Suited for owners of the listed EliteOne models

This upgrade suits IT managers and users who need a straightforward capacity increase for the HP EliteOne 1000 G1 or 800 G3. It is not for systems that require ECC or registered DIMMs, nor for platforms that use a different pin count or voltage. Buyers with other laptop, mini-desktop or NAS hardware should verify their exact model specifications before purchasing.

Přednosti

  • 16 GB DDR4 boosts multitasking on HP EliteOne 1000 G1 and 800 G3
  • 2400 MHz CL17 speed matches system spec for stable performance
  • 2 V low voltage reduces power draw and heat
  • 260-pin SODIMM form factor fits laptop and mini-desktop slots
  • JEDEC and RoHS compliant for warranty-safe upgrade

Specifikace

BrandOWC
Part Number2S4D42R816GB
Capacity16GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP EliteOne 1000 G1
HP EliteOne 800 G3

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will this 260-pin SODIMM fit the memory slots in my HP EliteOne 1000 G1 all-in-one?

Yes, the module uses the standard 260-pin DDR4 SODIMM form factor required by the HP EliteOne 1000 G1 and 800 G3 systems listed in the compatibility data.

What is the correct way to seat the module, and what step do people often miss?

Align the notch on the module's gold edge with the key in the slot, insert at a slight angle, then press down firmly until both side clips click into place; the step often missed is verifying both clips have fully engaged.

Does this 16 GB DDR4 2400 MHz stick require any firmware updates or periodic replacement?

No firmware updates are needed for the memory itself, and the module has no moving parts or heat spreader to wear out; it is designed to last the lifetime of the system under normal use.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.