OWC 16GB DDR4 2133MHz CL15 1.2V 288pin Non-ECC UDIMM memory upgrade
- 16GB
- 288-Pin DDR4 Non-EC…
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
OWC
16GB DDR4 2400MHz CL17 SODIMM memory upgrade for HP EliteOne 1000 G1 and 800 G3
This 16 GB DDR4 2400 MHz CL17 module is built for the HP EliteOne 1000 G1 and EliteOne 800 G3 all-in-one PCs. It uses the standard 260-pin SODIMM form factor, runs at 1.2 V, and is non-ECC unbuffered memory. The kit is fully JEDEC compliant and RoHS compliant, making it a warranty-safe upgrade for those specific systems.
The module replaces the factory-installed memory in compatible EliteOne units, adding 16 GB in a single slot. It is backward compatible with 2133 MHz DDR4, so it will downclock automatically if the system requires it. The jump is worth it when the original configuration has less than 16 GB total or runs at a lower speed, giving headroom for larger workloads and smoother multitasking.
This upgrade suits IT managers and users who need a straightforward capacity increase for the HP EliteOne 1000 G1 or 800 G3. It is not for systems that require ECC or registered DIMMs, nor for platforms that use a different pin count or voltage. Buyers with other laptop, mini-desktop or NAS hardware should verify their exact model specifications before purchasing.
| Brand | OWC |
|---|---|
| Part Number | 2S4D42R816GB |
| Capacity | 16GB |
| Type | 260-Pin DDR4 Non-ECC SODIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | HP EliteOne 1000 G1 HP EliteOne 800 G3 |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Yes, the module uses the standard 260-pin DDR4 SODIMM form factor required by the HP EliteOne 1000 G1 and 800 G3 systems listed in the compatibility data.
Align the notch on the module's gold edge with the key in the slot, insert at a slight angle, then press down firmly until both side clips click into place; the step often missed is verifying both clips have fully engaged.
No firmware updates are needed for the memory itself, and the module has no moving parts or heat spreader to wear out; it is designed to last the lifetime of the system under normal use.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?