Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap

OWC

OWC 1R6T32R4064S 64GB (4x16GB) DDR3L 1600 ECC Registered RDIMM Memory Upgrade Kit

SKU CH-9YAD-FWW8Q

64 GB kit of four 16 GB DDR3L 1600 ECC registered RDIMMs for Supermicro SuperBlade servers

  • Capacity64GB (4 x 16GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 64GB (4 x 16GB)

  • 64 GB total capacity from four 16 GB modules
  • DDR3L 1600 speed with CL11 latency for responsive server performance
  • 35 V low-voltage operation reduces power draw and heat
  • ECC registered design protects data integrity in critical workloads
  • Qualified for Supermicro SuperBlade 7127, 7142 and 7427 series

Server Memory Kit

This OWC kit provides 64GB of DDR3L ECC Registered memory across four 16GB modules. It is built for Supermicro SuperBlade 7127R, 7127RG, 7127RG3, 7142G and 7427R servers that require registered DIMMs. Standard desktop computers cannot use this memory type, and it must not be mixed with unbuffered modules.

Sustained Load Behaviour

ECC circuitry detects and corrects single-bit errors during continuous operation, preventing data corruption in long-running server workloads. Registered buffering reduces electrical load on the memory controller, helping maintain signal integrity when all four DIMM slots are populated. The CL11 latency at 1600MHz delivers steady throughput for virtualisation and database tasks.

Thermals and Power

Modules operate at 1.35V, lowering power draw compared to standard 1.5V DDR3. No heat spreaders are fitted, relying on the blade chassis airflow for cooling. The low-voltage DDR3L design reduces thermal output per module, supporting dense configurations in the SuperBlade enclosure.

Öne çıkanlar

  • 64 GB total capacity from four 16 GB modules
  • DDR3L 1600 speed with CL11 latency for responsive server performance
  • 35 V low-voltage operation reduces power draw and heat
  • ECC registered design protects data integrity in critical workloads
  • Qualified for Supermicro SuperBlade 7127, 7142 and 7427 series

Teknik özellikler

BrandOWC
Part Number1R6T32R4064S
Capacity64GB (4 x 16GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperBlade 7127R Series
Supermicro SuperBlade 7127RG Series
Supermicro SuperBlade 7127RG3 Series
Supermicro SuperBlade 7142G Series
Supermicro SuperBlade 7427R Series

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

How much power does the 1.35 V DDR3L kit draw when the server runs continuously?

Each module operates at 1.35 V, lower than standard DDR3, reducing heat and power draw during 24/7 operation in Supermicro SuperBlade 7127R, 7127RG, 7127RG3, 7142G or 7427R systems.

What must the chassis already provide for these 240-pin registered DIMMs to function?

The server must support DDR3L ECC registered memory, accept 240-pin RDIMMs, and run at 1600 MHz PC3L-12800 with CL11 timing — exactly as specified for the listed SuperBlade models.

Can the 2Rx4 CL11 1600 MHz modules share channels with existing DDR3L registered DIMMs in a SuperBlade?

Yes, provided the existing modules are also DDR3L ECC registered RDIMMs; mixing with unbuffered or non-ECC memory is not supported.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.