OWC 1R6T32R4064S 64GB DDR3L 1600 CL11 ECC Registered RDIMM 4x16GB SuperServer 2027 2028 4027
- 64GB (4 x 16GB)
- 240-Pin DDR3L ECC R…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
64 GB kit of four 16 GB DDR3L 1600 ECC registered RDIMMs for Supermicro SuperBlade servers
Capacity 64GB (4 x 16GB)
This OWC kit provides 64GB of DDR3L ECC Registered memory across four 16GB modules. It is built for Supermicro SuperBlade 7127R, 7127RG, 7127RG3, 7142G and 7427R servers that require registered DIMMs. Standard desktop computers cannot use this memory type, and it must not be mixed with unbuffered modules.
ECC circuitry detects and corrects single-bit errors during continuous operation, preventing data corruption in long-running server workloads. Registered buffering reduces electrical load on the memory controller, helping maintain signal integrity when all four DIMM slots are populated. The CL11 latency at 1600MHz delivers steady throughput for virtualisation and database tasks.
Modules operate at 1.35V, lowering power draw compared to standard 1.5V DDR3. No heat spreaders are fitted, relying on the blade chassis airflow for cooling. The low-voltage DDR3L design reduces thermal output per module, supporting dense configurations in the SuperBlade enclosure.
| Brand | OWC |
|---|---|
| Part Number | 1R6T32R4064S |
| Capacity | 64GB (4 x 16GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro SuperBlade 7127R Series Supermicro SuperBlade 7127RG Series Supermicro SuperBlade 7127RG3 Series Supermicro SuperBlade 7142G Series Supermicro SuperBlade 7427R Series |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Each module operates at 1.35 V, lower than standard DDR3, reducing heat and power draw during 24/7 operation in Supermicro SuperBlade 7127R, 7127RG, 7127RG3, 7142G or 7427R systems.
The server must support DDR3L ECC registered memory, accept 240-pin RDIMMs, and run at 1600 MHz PC3L-12800 with CL11 timing — exactly as specified for the listed SuperBlade models.
Yes, provided the existing modules are also DDR3L ECC registered RDIMMs; mixing with unbuffered or non-ECC memory is not supported.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?