Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Green circuit board with black memory chips, gold edge connector, no heat spreader

OWC

OWC 3U2D42R816GB 16GB DDR4 3200MHz CL22 1.2V 288pin Non-ECC UDIMM HP Z1 Workstation memory upgrade

SKU CH-MVHN-EPGXS

16 GB DDR4 3200 MHz CL22 1.2 V UDIMM for HP Z1 Workstation G5, G6 and G8 models

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.2V
  • ECCNo
  • 16 GB DDR4 3200 MHz CL22 boosts system responsiveness
  • 2 V low-voltage design reduces power draw and heat
  • 288-pin UDIMM form factor fits HP Z1 Workstation G5 G6 G8 SFF and Tower
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Backward compatible with 2133 2400 2666 2933 MHz speeds

HP Z1 Workstation memory upgrade

This 16GB DDR4 3200MHz CL22 UDIMM is built for HP Z1 Workstation G6, G8, G5 SFF, G5 Tower and G8 SFF systems. It runs at 1.2V with a 2Rx8 rank layout and no heat spreader. The module meets JEDEC PC4-25600 specifications and is backed by a limited lifetime warranty with free technical support.

Suitable for owners of listed HP Z1 models adding

Buyers who need ECC error correction or registered modules for server platforms should look elsewhere. Systems requiring speeds above 3200MHz or a different form factor will not accept this DIMM.

Simple DIY installation in most cases

Align the notch with the 288-pin slot and press until the latches click. Common issues include mixing speeds that force the system to run at the lowest common rate and failing to seat the module fully, which prevents the machine from posting.

Öne çıkanlar

  • 16 GB DDR4 3200 MHz CL22 boosts system responsiveness
  • 2 V low-voltage design reduces power draw and heat
  • 288-pin UDIMM form factor fits HP Z1 Workstation G5 G6 G8 SFF and Tower
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Backward compatible with 2133 2400 2666 2933 MHz speeds

Teknik özellikler

BrandOWC
Part Number3U2D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP Z1 Workstation G6
HP Z1 Workstation G8
HP Z1 Workstation G5 SFF
HP Z1 Workstation G5 Tower
HP Z1 Workstation G8 SFF

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Does the HP Z1 Workstation need a free 288-pin DDR4 UDIMM slot for this 16GB module?

Yes, the module is a 288-pin DDR4 Non-ECC UDIMM and requires an available DDR4 UDIMM slot on the motherboard.

Will this DDR4 3200MHz CL22 stick run at its rated speed alongside older 2133MHz DDR4 modules?

The module is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz DDR4, so it will downclock to match the slowest installed module.

How can I confirm the 16GB DDR4 3200MHz module is recognised at the correct speed after installation?

Enter the system BIOS or use a tool such as CPU-Z to verify the memory shows 16GB capacity and a 3200MHz data rate with CL22 timings.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.