Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green circuit board with black memory chips, gold edge connector, no heat spreader

OWC

OWC 3U2D42R816GB 16GB DDR4 3200MHz CL22 1.2V 288pin Non-ECC UDIMM HP Z1 Workstation memory upgrade

SKU CH-MVHN-EPGXS

16 GB DDR4 3200 MHz CL22 1.2 V UDIMM for HP Z1 Workstation G5, G6 and G8 models

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.2V
  • ECCNo
  • 16 GB DDR4 3200 MHz CL22 boosts system responsiveness
  • 2 V low-voltage design reduces power draw and heat
  • 288-pin UDIMM form factor fits HP Z1 Workstation G5 G6 G8 SFF and Tower
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Backward compatible with 2133 2400 2666 2933 MHz speeds

HP Z1 Workstation memory upgrade

This 16GB DDR4 3200MHz CL22 UDIMM is built for HP Z1 Workstation G6, G8, G5 SFF, G5 Tower and G8 SFF systems. It runs at 1.2V with a 2Rx8 rank layout and no heat spreader. The module meets JEDEC PC4-25600 specifications and is backed by a limited lifetime warranty with free technical support.

Suitable for owners of listed HP Z1 models adding

Buyers who need ECC error correction or registered modules for server platforms should look elsewhere. Systems requiring speeds above 3200MHz or a different form factor will not accept this DIMM.

Simple DIY installation in most cases

Align the notch with the 288-pin slot and press until the latches click. Common issues include mixing speeds that force the system to run at the lowest common rate and failing to seat the module fully, which prevents the machine from posting.

Ciri-ciri utama

  • 16 GB DDR4 3200 MHz CL22 boosts system responsiveness
  • 2 V low-voltage design reduces power draw and heat
  • 288-pin UDIMM form factor fits HP Z1 Workstation G5 G6 G8 SFF and Tower
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Backward compatible with 2133 2400 2666 2933 MHz speeds

Spesifikasi

BrandOWC
Part Number3U2D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP Z1 Workstation G6
HP Z1 Workstation G8
HP Z1 Workstation G5 SFF
HP Z1 Workstation G5 Tower
HP Z1 Workstation G8 SFF

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Does the HP Z1 Workstation need a free 288-pin DDR4 UDIMM slot for this 16GB module?

Yes, the module is a 288-pin DDR4 Non-ECC UDIMM and requires an available DDR4 UDIMM slot on the motherboard.

Will this DDR4 3200MHz CL22 stick run at its rated speed alongside older 2133MHz DDR4 modules?

The module is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz DDR4, so it will downclock to match the slowest installed module.

How can I confirm the 16GB DDR4 3200MHz module is recognised at the correct speed after installation?

Enter the system BIOS or use a tool such as CPU-Z to verify the memory shows 16GB capacity and a 3200MHz data rate with CL22 timings.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.