Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Green rectangular circuit board with gold edge contacts and black memory chips

OWC

OWC 8GB DDR3 1600 CL11 2Rx8 204-pin 1.5V SODIMM memory upgrade

SKU CH-8WG9-72FYS

8GB DDR3 1600 CL11 SODIMM module for ASUSTOR AS7004T, AS7008T and AS7012T NAS systems

  • Capacity8GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • 8GB capacity adds headroom for multitasking on compatible ASUSTOR NAS
  • DDR3 1600 PC3-12800 CL11 matches system-rated speed exactly
  • 5V JEDEC standard voltage ensures warranty-safe operation
  • 204-pin SODIMM form factor fits AS7004T AS7008T AS7012T slots directly
  • Single 2Rx8 module simplifies installation without pairing requirements

Compatible ASUSTOR NAS models

This 8 GB DDR3 1600 SODIMM is built for ASUSTOR AS7004T, AS7008T and AS7012T network-attached storage units. It arrives as a single 204-pin non-ECC module rated at 1.5 V with CL11 latency. The part replaces ASUSTOR part number AS7-RAM8G and meets JEDEC and RoHS standards.

Upgrading from lower-capacity modules

The module suits owners of the listed ASUSTOR NAS models who currently run smaller DDR3 SODIMMs and need more memory for multitasking or larger workloads. A jump to 8 GB is worthwhile when the system shows memory pressure during file transfers, virtualization or heavy application use. Systems already at the maximum supported capacity will not benefit.

Verify slot count and maximum memory

Before ordering, confirm how many SODIMM slots your NAS model provides and the total memory limit stated by ASUSTOR. The module is unbuffered, non-ECC, 2Rx8 and uses 1.5 V DDR3 at 1600 MHz; mixing different speeds, voltages or ranks can cause instability. Ensure the chassis allows physical access to the memory slots for installation.

Öne çıkanlar

  • 8GB capacity adds headroom for multitasking on compatible ASUSTOR NAS
  • DDR3 1600 PC3-12800 CL11 matches system-rated speed exactly
  • 5V JEDEC standard voltage ensures warranty-safe operation
  • 204-pin SODIMM form factor fits AS7004T AS7008T AS7012T slots directly
  • Single 2Rx8 module simplifies installation without pairing requirements

Teknik özellikler

BrandOWC
Part Number1S6D32R808GB
Capacity8GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemASUSTOR AS7004T
ASUSTOR AS7008T
ASUSTOR AS7012T

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Does the 204-pin DDR3 SODIMM fit the ASUSTOR AS7004T, AS7008T and AS7012T memory slots?

Yes, the 204-pin DDR3 SODIMM is built for the ASUSTOR AS7004T, AS7008T and AS7012T and replaces the AS7-RAM8G module.

What is the correct way to seat the module so the 204 pins make full contact?

Align the notch on the module with the key in the slot, insert at a slight angle, then press down firmly until the side clips click into place.

Will the 1.5V DDR3 1600 CL11 module need any firmware update or replacement after installation?

No firmware update is required; the JEDEC-standard 1.5V DDR3 1600 CL11 module runs at its rated speed and is covered by a limited lifetime warranty.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.