我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green rectangular circuit board with gold edge contacts and black memory chips

OWC

OWC 8GB DDR3 1600 CL11 2Rx8 204-pin 1.5V SODIMM memory upgrade

SKU CH-8WG9-72FYS

8GB DDR3 1600 CL11 SODIMM module for ASUSTOR AS7004T, AS7008T and AS7012T NAS systems

  • Capacity8GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • 8GB capacity adds headroom for multitasking on compatible ASUSTOR NAS
  • DDR3 1600 PC3-12800 CL11 matches system-rated speed exactly
  • 5V JEDEC standard voltage ensures warranty-safe operation
  • 204-pin SODIMM form factor fits AS7004T AS7008T AS7012T slots directly
  • Single 2Rx8 module simplifies installation without pairing requirements

Compatible ASUSTOR NAS models

This 8 GB DDR3 1600 SODIMM is built for ASUSTOR AS7004T, AS7008T and AS7012T network-attached storage units. It arrives as a single 204-pin non-ECC module rated at 1.5 V with CL11 latency. The part replaces ASUSTOR part number AS7-RAM8G and meets JEDEC and RoHS standards.

Upgrading from lower-capacity modules

The module suits owners of the listed ASUSTOR NAS models who currently run smaller DDR3 SODIMMs and need more memory for multitasking or larger workloads. A jump to 8 GB is worthwhile when the system shows memory pressure during file transfers, virtualization or heavy application use. Systems already at the maximum supported capacity will not benefit.

Verify slot count and maximum memory

Before ordering, confirm how many SODIMM slots your NAS model provides and the total memory limit stated by ASUSTOR. The module is unbuffered, non-ECC, 2Rx8 and uses 1.5 V DDR3 at 1600 MHz; mixing different speeds, voltages or ranks can cause instability. Ensure the chassis allows physical access to the memory slots for installation.

商品特色

  • 8GB capacity adds headroom for multitasking on compatible ASUSTOR NAS
  • DDR3 1600 PC3-12800 CL11 matches system-rated speed exactly
  • 5V JEDEC standard voltage ensures warranty-safe operation
  • 204-pin SODIMM form factor fits AS7004T AS7008T AS7012T slots directly
  • Single 2Rx8 module simplifies installation without pairing requirements

商品規格

BrandOWC
Part Number1S6D32R808GB
Capacity8GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemASUSTOR AS7004T
ASUSTOR AS7008T
ASUSTOR AS7012T

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Does the 204-pin DDR3 SODIMM fit the ASUSTOR AS7004T, AS7008T and AS7012T memory slots?

Yes, the 204-pin DDR3 SODIMM is built for the ASUSTOR AS7004T, AS7008T and AS7012T and replaces the AS7-RAM8G module.

What is the correct way to seat the module so the 204 pins make full contact?

Align the notch on the module with the key in the slot, insert at a slight angle, then press down firmly until the side clips click into place.

Will the 1.5V DDR3 1600 CL11 module need any firmware update or replacement after installation?

No firmware update is required; the JEDEC-standard 1.5V DDR3 1600 CL11 module runs at its rated speed and is covered by a limited lifetime warranty.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。