Seagate
Seagate ST9146802SS 146GB 10000RPM SAS 2.5in internal hard drive with caddy
A 146 GB 2.5-inch SAS hard drive spinning at 10000 RPM with 16 MB cache and an included caddy
- 10,000 RPM for fast data access
- 146 GB capacity stores critical files
- SAS 3 Gb/s interface enables server connectivity
- 16 MB cache improves read performance
- Includes caddy for secure 2.5-inch mounting
Seagate SAVVIO 146GB 10K SAS Drive
This Seagate SAVVIO internal hard drive delivers 146GB of storage in a 2.5-inch form factor. It spins at 10000RPM and connects via a SAS 3Gb/s interface with a 16MB buffer. The unit is supplied new and includes a mounting caddy for installation.
Suits SAS servers needing 10K speed.
This drive suits servers or arrays that accept 2.5-inch SAS drives running at 3Gb/s. It is not for systems lacking a SAS backplane or controller, nor for users who require larger capacities or solid-state performance. The 146GB limit and mechanical design rule out high-capacity or silent-operation needs.
3Gb/s SAS interface decides compatibility
The single specification that decides fitment is the 3Gb/s SAS interface. The host must provide a matching SAS port and support 2.5-inch drives; without that connection the drive cannot function.
Öne çıkanlar
- 10,000 RPM for fast data access
- 146 GB capacity stores critical files
- SAS 3 Gb/s interface enables server connectivity
- 16 MB cache improves read performance
- Includes caddy for secure 2.5-inch mounting
Teknik özellikler
Bu ürün için henüz yayınlanmış teknik özellik yok.
Bu ürünle ilgili sorular
What does the 3Gb/s SAS interface limit in practice?
The 3Gb/s SAS interface sets the maximum data-transfer rate between the drive and the controller, so sustained reads and writes cannot exceed that link speed
What physical space and mounting does the 2.5in SAS drive with caddy require?
The drive fits a standard 2.5in drive bay; the included caddy provides the screw holes and carrier rails needed to secure it in a server or storage chassis
How is the ST9146802SS installed, and what step is often missed?
Slide the caddy-mounted drive into the bay until the SAS connector seats firmly, then fasten the caddy screws; the step often missed is fully engaging the connector before tightening the screws
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
