Seagate
Seagate ST9146802SS 146GB 10000RPM SAS 2.5in internal hard drive with caddy
A 146 GB 2.5-inch SAS hard drive spinning at 10000 RPM with 16 MB cache and an included caddy
- 10,000 RPM for fast data access
- 146 GB capacity stores critical files
- SAS 3 Gb/s interface enables server connectivity
- 16 MB cache improves read performance
- Includes caddy for secure 2.5-inch mounting
Seagate SAVVIO 146GB 10K SAS Drive
This Seagate SAVVIO internal hard drive delivers 146GB of storage in a 2.5-inch form factor. It spins at 10000RPM and connects via a SAS 3Gb/s interface with a 16MB buffer. The unit is supplied new and includes a mounting caddy for installation.
Suits SAS servers needing 10K speed.
This drive suits servers or arrays that accept 2.5-inch SAS drives running at 3Gb/s. It is not for systems lacking a SAS backplane or controller, nor for users who require larger capacities or solid-state performance. The 146GB limit and mechanical design rule out high-capacity or silent-operation needs.
3Gb/s SAS interface decides compatibility
The single specification that decides fitment is the 3Gb/s SAS interface. The host must provide a matching SAS port and support 2.5-inch drives; without that connection the drive cannot function.
أبرز المميزات
- 10,000 RPM for fast data access
- 146 GB capacity stores critical files
- SAS 3 Gb/s interface enables server connectivity
- 16 MB cache improves read performance
- Includes caddy for secure 2.5-inch mounting
المواصفات
لا توجد مواصفات منشورة لهذا المنتج بعد.
أسئلة حول هذا المنتج
What does the 3Gb/s SAS interface limit in practice?
The 3Gb/s SAS interface sets the maximum data-transfer rate between the drive and the controller, so sustained reads and writes cannot exceed that link speed
What physical space and mounting does the 2.5in SAS drive with caddy require?
The drive fits a standard 2.5in drive bay; the included caddy provides the screw holes and carrier rails needed to secure it in a server or storage chassis
How is the ST9146802SS installed, and what step is often missed?
Slide the caddy-mounted drive into the bay until the SAS connector seats firmly, then fasten the caddy screws; the step often missed is fully engaging the connector before tightening the screws
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
Iomega Corp Z250ATAPI BLACK 250MB ZIP backup drive
- 250MB
- 2941RPM
DELL 7T0DW 600GB 2.5" SAS 10000 RPM laptop hard drive
- Serial Attached SCS…
- 10000 RPM
Seagate ST500LT015 500GB 5400 RPM 16MB Cache SATA 6.0Gb/s 2.5" 7mm laptop hard drive
- 500GB
- 5400 RPM



