BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00279516BTC
Stokta
SK hynix
SK hynix HMT451S6BFR8A-PB 8GB (2 x 4GB) DDR3 1600 laptop RAM
Two 4 GB DDR3-1600 SO-DIMM modules at 1.35 V with CL11 latency for laptop upgrades
- Capacity8GB (2 x 4GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCNo
- Dual-channel 8 GB kit for smoother multitasking
- DDR3 1600 speed keeps older laptops responsive
- Low 1.35 V operation reduces heat and power draw
- CL11 latency supports snappy application loading
- 204-pin SO-DIMM fits standard DDR3 laptop slots
Capacity and fit
This kit supplies 8 GB of DDR3 laptop memory as two matched 4 GB SO-DIMM modules. Each stick uses the standard 204-pin layout and runs at DDR3 1600 with a CAS latency of CL11. The low 1.35 V operating voltage suits thin-and-light notebooks that cannot tolerate standard 1.5 V parts.
Thermals and power
At 1.35 V the modules draw less current than regular DDR3, so they generate modest heat during typical office or web workloads. No active cooling is required; the chips rely on the laptop’s existing airflow and chassis conduction. Passive operation means zero added fan noise.
Build and connectors
The green PCB carries SK hynix DRAM packages in a standard SO-DIMM footprint that slots into any compatible 204-pin socket. Gold edge contacts resist oxidation over repeated upgrades. Because the kit is non-ECC and unbuffered, it works in consumer notebooks but not in servers that require registered or error-correcting memory.
Öne çıkanlar
- Dual-channel 8 GB kit for smoother multitasking
- DDR3 1600 speed keeps older laptops responsive
- Low 1.35 V operation reduces heat and power draw
- CL11 latency supports snappy application loading
- 204-pin SO-DIMM fits standard DDR3 laptop slots
Teknik özellikler
| Brand | Hynix |
|---|---|
| Series | SODIMM Laptop Memory |
| Model | HMT451S6BFR8A-PB |
| Capacity | 8GB (2 x 4GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
Bu ürünle ilgili sorular
How do I install the 204-Pin DDR3 SO-DIMM modules into my laptop?
Power off the laptop, remove the battery if accessible, open the memory compartment, align the module notch with the slot key, insert at an angle, then press down firmly until the side clips click.
What maintenance or replacement will the 8GB (2 x 4GB) kit need later?
No routine maintenance is required; keep the contacts clean and ensure the laptop vents stay dust-free. Replace the modules only if a memory test reports errors or capacity becomes insufficient.
What limit appears first when the DDR3 1600 CL11 1.35V kit runs under sustained load?
The CAS latency of CL11 and the 1.35 V operating voltage set the timing and power envelope; sustained heavy workloads will hit those timing constraints before thermal throttling becomes a factor.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
