NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.
Syba
Adds four USB 3.0 ports at up to 5.0 Gbps via a PCI Express 2.0 x1 slot with a Molex power connector
The Syba SD-PEX20133 adds four external USB 3.0 ports through a single PCI Express 2.0 x1 slot. It uses a VLI VL80x host controller compliant with the xHCI 0.96 specification. A Molex power connector supplies the required current for connected devices. The card supports data rates up to 5.0 Gbps per port.
Builders upgrading legacy systems gain modern USB speed without replacing the motherboard. The driver CD provides support for Windows XP, Vista, 7, 2000 and Server 2003-2008 in both 32- and 64-bit editions. Systems lacking a spare PCI Express x1 slot or a Molex power lead cannot use this card. Buyers needing internal USB headers or newer OS support should look elsewhere.
The x1 interface caps aggregate throughput at the 2.0 generation rate, so four simultaneous 5.0 Gbps ports will share that ceiling. This constraint decides whether the card meets a workload that demands sustained maximum throughput on every port.
| Brand | SYBA |
|---|---|
| Model | SD-PEX20133 |
| Type | PCI Express to USB Card |
| External USB Ports | 4x USB Ports |
| Standard | USB 3.0 |
| Data Transfer Rate | Up to 5.0 Gbps |
| Operating Systems Supported | Windows 7 (32/64-bit) Vista (32/64-bit) Windows XP (32/64-bit) Windows 2000 (32/64-bit) Server 2003-2008 (32/64-bit) |
| Specifications | Real Connector: Molex (IDE 4-pin) Power Connector Based on VLI VL80x (VL800-Q8) USB 3.0 Host Controller IC Compliant with Intel's Extensible Host Controller Interface (xHCI) Specification Revision 0.96 Compliant with PCI Express Base Specification 2.0 PCI-e Specification: - PCI-Express 2.0 1-Lane (x1) Interface with Data Transfer Rate up to 5Gbps - Backwards Compatible to PCI-Express 1.0a with Data Transfer Rate up to 2.5Gbps - Internal HDD Power Connector for Supplying Extra +5V Power to the USB Ports - Internal HDD Power Connector LED Indicator: Lights Up when USB BUS Power is Supp |
| Weight | 1 |
| Package Contents | USB 3.0 4-port PCI-e Controller Card User Manual Driver CD |
| Kargo ağırlığı | 0.13 kg |
| Koli boyutu | 191 × 142 × 36 mm |
Yes, the SD-PEX20133 uses a PCI Express 2.0 x1 host interface, so it installs directly into any compatible x1 slot on an older board.
Check Device Manager to confirm the controller appears under Universal Serial Bus controllers without error codes, then run a file transfer to a USB 3.0 drive and observe speeds approaching the rated throughput.
The package contains the controller card, a user manual and a driver CD; a Molex power lead is not included and must be sourced from your power supply or purchased separately.
Bu reyondan diğerleri
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
Ödediğiniz koin ve fiyatları gördüğünüz para birimi.
Ödeme sırasında cüzdanınızdan gönderilir.
Yalnızca görüntüleme içindir — katalog USD cinsinden fiyatlandırılır.
Eşleşen para birimi yok.
Sitenin size hangi dilde hitap edeceğini seçin.
İlk kez mi geliyorsunuz?
Zaten hesabınız var mı?
Otomatik bir sıfırlama yoktur: bu mağaza hiç e-posta göndermez, dolayısıyla talep edilecek tek kullanımlık bir bağlantı da yoktur. Adresi hesapta bırakın, elle işleme alınır.
Talep alındı
Gelen kutunuza doğru giden hiçbir şey yok — bu mağaza hiç e-posta göndermez. Bunları biri elle işleme alır.
Hatırladınız mı?