NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
Syba
Adds four USB 3.0 ports at up to 5.0 Gbps via a PCI Express 2.0 x1 slot with a Molex power connector
The Syba SD-PEX20133 adds four external USB 3.0 ports through a single PCI Express 2.0 x1 slot. It uses a VLI VL80x host controller compliant with the xHCI 0.96 specification. A Molex power connector supplies the required current for connected devices. The card supports data rates up to 5.0 Gbps per port.
Builders upgrading legacy systems gain modern USB speed without replacing the motherboard. The driver CD provides support for Windows XP, Vista, 7, 2000 and Server 2003-2008 in both 32- and 64-bit editions. Systems lacking a spare PCI Express x1 slot or a Molex power lead cannot use this card. Buyers needing internal USB headers or newer OS support should look elsewhere.
The x1 interface caps aggregate throughput at the 2.0 generation rate, so four simultaneous 5.0 Gbps ports will share that ceiling. This constraint decides whether the card meets a workload that demands sustained maximum throughput on every port.
| Brand | SYBA |
|---|---|
| Model | SD-PEX20133 |
| Type | PCI Express to USB Card |
| External USB Ports | 4x USB Ports |
| Standard | USB 3.0 |
| Data Transfer Rate | Up to 5.0 Gbps |
| Operating Systems Supported | Windows 7 (32/64-bit) Vista (32/64-bit) Windows XP (32/64-bit) Windows 2000 (32/64-bit) Server 2003-2008 (32/64-bit) |
| Specifications | Real Connector: Molex (IDE 4-pin) Power Connector Based on VLI VL80x (VL800-Q8) USB 3.0 Host Controller IC Compliant with Intel's Extensible Host Controller Interface (xHCI) Specification Revision 0.96 Compliant with PCI Express Base Specification 2.0 PCI-e Specification: - PCI-Express 2.0 1-Lane (x1) Interface with Data Transfer Rate up to 5Gbps - Backwards Compatible to PCI-Express 1.0a with Data Transfer Rate up to 2.5Gbps - Internal HDD Power Connector for Supplying Extra +5V Power to the USB Ports - Internal HDD Power Connector LED Indicator: Lights Up when USB BUS Power is Supp |
| Weight | 1 |
| Package Contents | USB 3.0 4-port PCI-e Controller Card User Manual Driver CD |
| משקל משלוח | 0.13 kg |
| מידות האריזה | 191 × 142 × 36 mm |
Yes, the SD-PEX20133 uses a PCI Express 2.0 x1 host interface, so it installs directly into any compatible x1 slot on an older board.
Check Device Manager to confirm the controller appears under Universal Serial Bus controllers without error codes, then run a file transfer to a USB 3.0 drive and observe speeds approaching the rated throughput.
The package contains the controller card, a user manual and a driver CD; a Molex power lead is not included and must be sourced from your power supply or purchased separately.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?