Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Standalone M.2 duplicator unit with four target slots, silver metal finish

Systor

Systor SYSNVME-YL06REG04 1-to-4 M.2 NVMe/SATA Duplicator 36GB/min

SKU CH-XFAQ-0KC51

Standalone duplicator copies or erases up to four M.2 NVMe or SATA drives simultaneously at 36 GB per minute

  • TypeHard Drive Duplicator
  • Target1 to 4
  • Data Transfer Rate600MB/s
  • Operating TypeStandalone
  • Dimensions (H x W x D)11 x 8.25 x 6

TARGET SIZE 1 to 04

DATA TRANSFER RATE 36.0GB/min [600MB/sec] NO HDD RACK

  • Standalone operation requires no host computer
  • Copies up to 36 GB per minute at 600 MB/s
  • Supports M.2 2230, 2242, 2260, 2280 keys B, M, B+M
  • Optional adapters add 2.5" and 3.5" SATA drive support
  • Downloadable event log records job results and drive details

Standalone 1-to-4 M.2 Duplicator

This Systor duplicator copies or erases up to four M.2 drives at once without a host computer. It accepts NVMe and SATA M.2 modules in 2230, 2242, 2260 and 2280 form factors. Optional adapters extend support to 2.5 and 3.5 inch SATA drives. The unit operates completely independently with a single-button start.

Sustained 36 GB per Minute Copy Rate

The duplicator maintains a 600 MB per second transfer rate across all target ports simultaneously. Speed does not degrade as more drives are added to the job. It handles proprietary and unknown partition formats alongside Windows, Linux and Mac file systems. Actual throughput depends on the read and write limits of the source and target drives installed.

Check Drive Keys and Power Before Ordering

Verify that your M.2 modules use B key, M key or B+M key interfaces compatible with the 22 mm wide slots. Ensure you have the correct optional adapters if you plan to duplicate 2.5 or 3.5 inch SATA drives. The device measures 11 by 8.25 by 6 inches, so confirm bench space for the unit and its cabling.

Öne çıkanlar

  • Standalone operation requires no host computer
  • Copies up to 36 GB per minute at 600 MB/s
  • Supports M.2 2230, 2242, 2260, 2280 keys B, M, B+M
  • Optional adapters add 2.5" and 3.5" SATA drive support
  • Downloadable event log records job results and drive details

Teknik özellikler

BrandSystor
ModelSYSNVME-YL06REG04
Part NumberSYSNVME-YL06REG04
TypeHard Drive Duplicator
Target1 to 4
Data Transfer Rate600MB/s
Operating TypeStandalone
Dimensions (H x W x D)11 x 8.25 x 6

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

How much heat or noise does the duplicator produce when copying four drives at 36 GB/min for hours?

The unit runs completely standalone with no PC required, so its only active components are the drive slots and internal controller; no fan specs or thermal ratings are published.

What cables, adapters or power supplies must I already own to use the four target slots?

The duplicator accepts M.2 drives directly in 2230, 2242, 2260 and 2280 sizes with B, M or B+M keys; 2.5" or 3.5" SATA drives need optional adapters not included.

Will the duplicator recognise a 2242 NVMe drive formatted with an older MBR partition table?

Yes — it supports MBR and GPT partitioning plus Windows, Linux and Mac file systems, so legacy MBR drives copy without extra steps.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.