Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Standalone M.2 duplicator unit with four target slots, silver metal finish

Systor

Systor SYSNVME-YL06REG04 1-to-4 M.2 NVMe/SATA Duplicator 36GB/min

SKU CH-XFAQ-0KC51

Standalone duplicator copies or erases up to four M.2 NVMe or SATA drives simultaneously at 36 GB per minute

  • TypeHard Drive Duplicator
  • Target1 to 4
  • Data Transfer Rate600MB/s
  • Operating TypeStandalone
  • Dimensions (H x W x D)11 x 8.25 x 6

TARGET SIZE 1 to 04

DATA TRANSFER RATE 36.0GB/min [600MB/sec] NO HDD RACK

  • Standalone operation requires no host computer
  • Copies up to 36 GB per minute at 600 MB/s
  • Supports M.2 2230, 2242, 2260, 2280 keys B, M, B+M
  • Optional adapters add 2.5" and 3.5" SATA drive support
  • Downloadable event log records job results and drive details

Standalone 1-to-4 M.2 Duplicator

This Systor duplicator copies or erases up to four M.2 drives at once without a host computer. It accepts NVMe and SATA M.2 modules in 2230, 2242, 2260 and 2280 form factors. Optional adapters extend support to 2.5 and 3.5 inch SATA drives. The unit operates completely independently with a single-button start.

Sustained 36 GB per Minute Copy Rate

The duplicator maintains a 600 MB per second transfer rate across all target ports simultaneously. Speed does not degrade as more drives are added to the job. It handles proprietary and unknown partition formats alongside Windows, Linux and Mac file systems. Actual throughput depends on the read and write limits of the source and target drives installed.

Check Drive Keys and Power Before Ordering

Verify that your M.2 modules use B key, M key or B+M key interfaces compatible with the 22 mm wide slots. Ensure you have the correct optional adapters if you plan to duplicate 2.5 or 3.5 inch SATA drives. The device measures 11 by 8.25 by 6 inches, so confirm bench space for the unit and its cabling.

Pontos fortes

  • Standalone operation requires no host computer
  • Copies up to 36 GB per minute at 600 MB/s
  • Supports M.2 2230, 2242, 2260, 2280 keys B, M, B+M
  • Optional adapters add 2.5" and 3.5" SATA drive support
  • Downloadable event log records job results and drive details

Especificações

BrandSystor
ModelSYSNVME-YL06REG04
Part NumberSYSNVME-YL06REG04
TypeHard Drive Duplicator
Target1 to 4
Data Transfer Rate600MB/s
Operating TypeStandalone
Dimensions (H x W x D)11 x 8.25 x 6

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

How much heat or noise does the duplicator produce when copying four drives at 36 GB/min for hours?

The unit runs completely standalone with no PC required, so its only active components are the drive slots and internal controller; no fan specs or thermal ratings are published.

What cables, adapters or power supplies must I already own to use the four target slots?

The duplicator accepts M.2 drives directly in 2230, 2242, 2260 and 2280 sizes with B, M or B+M keys; 2.5" or 3.5" SATA drives need optional adapters not included.

Will the duplicator recognise a 2242 NVMe drive formatted with an older MBR partition table?

Yes — it supports MBR and GPT partitioning plus Windows, Linux and Mac file systems, so legacy MBR drives copy without extra steps.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.