Team Group
Team Group TM8FGP002T0C101 2TB PCIe 5.0 NVMe internal SSD
- Internal Solid Stat…
- Consumer
$288,99
0.00372852BTC
Stokta
Team Group
Team Group TM8FGP001T0C101 1TB PCIe 5.0 NVMe internal SSD
1TB M.2 2280 NVMe SSD with PCIe 5.0 x4 interface delivering up to 10000 MB/s read and 8200 MB/s write speeds
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory Components3D NAND
- InterfacePCI-Express 5.0 x4
Capacity 1TB
- 1TB
- 2TB
- Up to 10000 MB/s sequential read via PCIe 5.0 x4
- Up to 8200 MB/s sequential write via PCIe 5.0 x4
- 600 TBW endurance backed by 3D NAND
- 1,500,000 hours MTBF for long-term reliability
- 1GB DRAM cache improves sustained performance
1TB PCIe 5.0 NVMe drive
The Team Group NV10000 is a 1TB M.2 2280 internal SSD built for consumers who need fast storage in desktops or laptops. It uses 3D NAND flash and a PCIe 5.0 x4 interface with NVMe protocol to reach sequential reads up to 10000 MBps and writes up to 8200 MBps. A 1GB DRAM cache helps sustain performance during heavy workloads.
Fits M.2 2280 slots with PCIe 5.0 support
The drive measures 3.70mm in height and operates from 0°C to 70°C without a heatsink, so it relies on motherboard or laptop cooling. It requires a platform with a PCIe 5.0 x4 M.2 slot to deliver rated speeds, though it will negotiate down on older slots. The compact form factor leaves room for other components in tight builds.
Replaces PCIe 4.0 NVMe drives when speed matters
With 600TB TBW and a 1500000-hour MTBF, it offers endurance for long-term use. The jump from a PCIe 4.0 drive is worth it for workflows that move large files or run sustained transfers, where the Gen5 interface cuts wait times. On PCIe 4.0 or 3.0 slots the drive works but cannot reach its peak rates.
Öne çıkanlar
- Up to 10000 MB/s sequential read via PCIe 5.0 x4
- Up to 8200 MB/s sequential write via PCIe 5.0 x4
- 600 TBW endurance backed by 3D NAND
- 1,500,000 hours MTBF for long-term reliability
- 1GB DRAM cache improves sustained performance
Teknik özellikler
| Brand | Team Group |
|---|---|
| Model | NV10000 M.2 PCIe 5.0 SSD |
| Part Number | TM8FGP001T0C101 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 5.0 x4 |
| Protocol | NVMe |
| Cache | 1GB DRAM |
| Max Sequential Read | Up to 10000 MBps |
| Max Sequential Write | Up to 8200 MBps |
| Terabytes Written (TBW) | 600TB |
| MTBF | 1,500,000 hours |
| HeatSink | without HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1,500G/0.5ms |
| Height | 3.70mm |
| Width | 22mm |
| Depth | 80mm |
| Weight | 7g |
| Kargo ağırlığı | 0.01 kg |
| Koli boyutu | 123 × 95 × 13 mm |
Bu modelin diğer sürümleri
Aynı seriden 1 tane daha
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
Bu ürünle ilgili sorular
At what operating temperature does the TM8FGP001T0C101 begin to throttle?
The drive is rated for 0°C to +70°C; sustained heavy workloads that push the controller toward the upper end of this range will trigger thermal throttling first.
How loud or hot does the NV10000 get during all-day operation without an extra heatsink?
The drive ships with a graphene heat spreader and no active cooling; under continuous load it runs silently but can approach the 70°C limit, so case airflow or a motherboard heatsink is advisable.
What motherboard slot and firmware support must I already have for this 1TB PCIe 5.0 drive to work?
You need an M.2 2280 slot wired for PCIe 5.0 x4 and a BIOS/UEFI that supports NVMe boot; older PCIe 4.0-only slots will work but at reduced speed.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
