Zyvpee
Zyvpee 2806KL-04W-B59 C57 70×15 mm 3-pin case fan
A 70×15 mm ball-bearing case fan running at 12 V and 0.28 A with a three-pin connector
- TypeCase Fan
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- FeaturesCPU Cooling Fan
- Ball bearing for longer service life
- 12 V 0.28 A draws minimal power
- 70 × 15 mm fits tight chassis spaces
- 3-pin connector enables speed monitoring
- Non-LED black frame keeps builds clean
Compact 70 mm case fan for tight builds
This Zyvpee 7015 frame fits small-form-factor chassis and CPU coolers that require a 70 mm square footprint. It runs on 12 V DC and draws 0.28 A through a standard three-pin connector. The ball bearing is rated for continuous operation in desktop and industrial environments.
Simple three-pin installation with polarity care
Align the three pins with the motherboard or controller header; the keyed shroud prevents reverse insertion. The only common issue is reversed wiring if the connector is forced, which stops the fan from spinning. No PWM signal wire is present, so speed control relies on voltage regulation.
Verify mounting holes
Measure the screw centres on your existing cooler or chassis to confirm they match the 70 mm square pattern. Ensure your board or fan controller provides a three-pin DC header; a four-pin PWM header will work but will not enable pulse-width modulation. Check that 12 V supply is available on the chosen header.
Öne çıkanlar
- Ball bearing for longer service life
- 12 V 0.28 A draws minimal power
- 70 × 15 mm fits tight chassis spaces
- 3-pin connector enables speed monitoring
- Non-LED black frame keeps builds clean
Teknik özellikler
| Brand | Zyvpee |
|---|---|
| Series | 2806KL-04W-B59 C57 |
| Model | 2806KL-04W-B59 |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling Fan |
| Dimensions | 70*15MM |
Bu ürünle ilgili sorular
How can I confirm the 70×15 mm fan is running after I connect the 3-pin header?
The fan should spin steadily once the 12 V 3-pin connector is seated on the motherboard header; listen for smooth rotation and check the BIOS or monitoring software for a reported RPM reading.
What comes with the 2806KL-04W-B59 and what must I source separately?
The package contains the 70 mm ball-bearing case fan with its attached 3-pin power lead; mounting screws, fan filters or a fan controller are not included and must be purchased separately.
Which version of the 7015 series should I choose for a 12 V 0.28 A header?
The 2806KL-04W-B59 C57 is rated for 12 V and 0.28 A, so it matches a standard 12 V 3-pin header; select this model when your board supplies 12 V on the fan connector.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
$0,82
0.00001048BTC
Stokta