A-Tech
A-Tech 16GB DDR3L 1600 ECC RDIMM 2Rx4 1.35V for Kingston D2G72K111 KTL-TS316/16G KVR16LR11D4K4/64 server RAM
16GB DDR3L 1600 ECC registered DIMM with 2Rx4 organisation and 1.35V operation
- Capacity16GB
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCYes
- Buffered/RegisteredRegistered
- 16GB DDR3L 1600 server memory expands capacity
- ECC registered design corrects data errors automatically
- 35V low-voltage operation reduces power draw
- 2Rx4 dual-rank layout boosts throughput per slot
- 240-pin DIMM fits standard DDR3 server boards
16GB DDR3L ECC RDIMM for servers
This 16GB registered DDR3L module runs at 1600MHz with CL11 latency and 1.35V operation. It targets administrators upgrading Kingston D2G72K111, KTL-TS316/16G or KVR16LR11D4K4/64 compatible systems. The 2Rx4 organisation uses major-brand chips tested for server workloads.
Sustained load behaviour with registered ECC
Registered buffering reduces electrical load on the memory controller during continuous operation. ECC circuitry corrects single-bit errors and detects multi-bit errors without halting the system. The 1.35V low-voltage design limits heat output when all ranks are active for extended periods.
DDR3L 240-pin interface practical limits
The 240-pin DIMM form factor fits only DDR3 or DDR3L slots keyed for 1.35V or 1.5V operation. Maximum throughput is defined by the PC3L-12800 rating at 1600MHz. Systems requiring higher bandwidth or different keying cannot use this module.
Акценти
- 16GB DDR3L 1600 server memory expands capacity
- ECC registered design corrects data errors automatically
- 35V low-voltage operation reduces power draw
- 2Rx4 dual-rank layout boosts throughput per slot
- 240-pin DIMM fits standard DDR3 server boards
Спецификации
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Въпроси за този артикул
How much power does the 1.35V DDR3L module draw when the server runs all day?
The module operates at 1.35V, which is the low-voltage DDR3L standard, reducing power draw and heat compared to standard 1.5V DDR3 during continuous operation.
What motherboard slot and CPU memory controller are required for this 240-pin ECC RDIMM?
You need a server or workstation motherboard with DDR3 240-pin DIMM slots and a CPU memory controller that supports registered ECC DDR3L at 1600MHz.
Will this CL11 1600MHz registered module work alongside older CL9 DDR3 ECC RDIMMs already installed?
Mixing different CAS latencies is possible; the system will typically run all modules at the slowest speed and highest latency present, but stability depends on the platform.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.



