Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 4GB DDR3 1600 ECC SODIMM CL11 1.5V 204-Pin 1Rx8

SKU CH-1HKZ-H827W

A 4 GB DDR3 ECC SODIMM running at 1600 MHz with CL11 latency and 1.5 V for compatible laptops and microservers

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes

Capacity 4GB

Speed DDR3 1600 (PC3 12800)

CAS Latency CL11

  • ECC protection guards data integrity in critical workloads
  • 4 GB DDR3 1600 MHz module runs at CL11 latency
  • Single-rank 1Rx8 layout simplifies memory controller scheduling
  • Standard 1.5 V JEDEC voltage ensures broad platform compatibility
  • 204-pin SO-DIMM form factor fits microserver and NAS slots

A-Tech 4GB DDR3 1600 ECC SODIMM

This 4 GB DDR3 module runs at 1600 MHz with CL11 latency and 1.5 V operation. It uses a 204-pin SO-DIMM form factor and provides ECC error correction in an unbuffered design. The single-rank 1Rx8 organisation suits compatible DDR3 platforms.

Microservers, mobile workstations

Builders upgrading a system that accepts DDR3 ECC unbuffered SO-DIMM memory will gain data-integrity protection. Systems limited to non-ECC DDR3 or those requiring registered modules cannot use this part. Buyers needing higher capacity should look elsewhere.

ECC unbuffered DDR3 SO-DIMM with 1Rx8 layout

The combination of ECC unbuffered operation and single-rank x8 organisation determines whether the module works in a given platform. Verify that the motherboard or chassis explicitly supports ECC unbuffered DDR3 SO-DIMM before purchase.

Акценти

  • ECC protection guards data integrity in critical workloads
  • 4 GB DDR3 1600 MHz module runs at CL11 latency
  • Single-rank 1Rx8 layout simplifies memory controller scheduling
  • Standard 1.5 V JEDEC voltage ensures broad platform compatibility
  • 204-pin SO-DIMM form factor fits microserver and NAS slots

Спецификации

BrandA-Tech
SeriesA-Tech DDR3 ECC SODIMM
ModelA-Tech 4GB 1Rx8 PC3-12800 ECC SODIMM
Part NumberNE-SS-0559
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesECC SODIMM
Recommend UseAMD & Intel Compatible
OptionECC SODIMM

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

What comes in the box with the A-Tech 4GB DDR3 1600 ECC SODIMM and do I need anything else?

The box contains one 4GB DDR3 1600 ECC SODIMM module. No extra cables or brackets are required; the module installs directly into a compatible 204-pin SO-DIMM slot.

Should I choose this 4GB single-rank ECC SODIMM or a different capacity for my microserver?

This module provides 4GB in a single 1Rx8 rank at 1.5V. Select it when your system needs ECC unbuffered DDR3 SO-DIMMs and you want a single 4GB stick; add a second identical module if your board supports dual-channel operation.

What does the 1600 MHz speed rating mean once the module is installed in my NAS server?

The module runs at DDR3 1600 (PC3-12800) with CL11 latency at standard 1.5V, delivering the rated throughput when the platform enables ECC unbuffered operation at that frequency.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.