Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Two green DDR3 ECC UDIMM sticks, 240-pin, 1Rx8, 1.5V

A-Tech

A-Tech 8GB (2x4GB) DDR3 1600 ECC UDIMM 1Rx8 1.5V Server RAM

SKU CH-2RYT-JJV6A

8 GB dual-channel DDR3 1600 ECC unbuffered DIMM kit with 1.5 V operation and CL11 latency for compatible servers and workstations

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 8GB (2 x 4GB)

Speed DDR3 1600 (PC3 12800)

  • 8GB dual-channel kit expands server memory capacity
  • ECC protection detects and corrects single-bit data errors
  • DDR3 1600 MHz speed matches PC3-12800E system requirements
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin unbuffered DIMM form factor fits supported server slots

8GB DDR3 ECC UDIMM kit

This A-Tech kit supplies 8 GB of DDR3 ECC unbuffered memory in two 4 GB modules. It is built for servers and workstations that require error-correcting DIMMs and will not fit or function in standard desktop or laptop platforms.

Sustained load behaviour

Each module operates at 1600 MHz with CL11 latency and 1.5 V, delivering steady throughput for long-running server workloads. The single-rank 1Rx8 organisation helps maintain consistent bandwidth across both channels during extended operations.

DDR3 interface limits

The DDR3 1600 standard caps module speed at 1600 MHz and peak transfer rate at PC3-12800. Systems that only support lower DDR3 speeds will downclock the kit, while platforms requiring registered or load-reduced DIMMs cannot use these unbuffered modules.

Акценти

  • 8GB dual-channel kit expands server memory capacity
  • ECC protection detects and corrects single-bit data errors
  • DDR3 1600 MHz speed matches PC3-12800E system requirements
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin unbuffered DIMM form factor fits supported server slots

Спецификации

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 1Rx8 PC3-12800E
Capacity8GB (2 x 4GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

How much power does the 1.5 V DDR3 1600 kit draw when the server runs all day?

The modules operate at the standard DDR3 voltage of 1.5 V, so power draw matches the JEDEC specification for 1.5 V DDR3 1600 UDIMMs under load.

What must my motherboard provide to use this 240-pin ECC UDIMM kit?

Your board needs DDR3 DIMM slots that accept unbuffered ECC modules and a chipset that supports ECC UDIMM operation.

Will the CL11 1Rx8 modules run alongside other DDR3 ECC DIMMs I keep installed?

Mixing ranks and speeds is possible if the motherboard trains all slots to a common speed and timing, but stability depends on the specific platform.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.