NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
A-Tech
An 8 GB DDR3L 1600 ECC registered DIMM with 1.35 V low voltage and 2Rx8 organisation for server upgrades
This 8GB DDR3L module runs at 1600MHz with CL11 latency and 1.35V operation. It uses a 2Rx8 registered DIMM design with ECC for data integrity. The 240-pin form factor fits compatible server and workstation boards. Major brand chips provide reliable performance for demanding workloads.
This module suits administrators upgrading or repairing systems that require DDR3L registered ECC RDIMMs. It replaces specific Samsung part numbers including M393B1G73BH0-YK0 and related variants. Builders needing unbuffered UDIMMs or non-ECC memory should look at different modules. Systems limited to 1.5V DDR3 without low-voltage support cannot use this part.
The defining specification is the registered ECC RDIMM design combined with 1.35V DDR3L voltage. This combination determines compatibility with server chipsets that require registered modules and error correction. Verify your system documentation specifies DDR3L RDIMM support before purchasing. The 2Rx8 organisation and CL11 timing are secondary factors for compatibility.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Yes, the module uses the standard 240-pin DDR3 DIMM form factor and operates at 1.35 V, so it fits and runs in any server board that accepts DDR3L 1600 registered ECC memory.
It is listed as a direct replacement for that Samsung part number and shares the same 2Rx8 organisation, CL11 timing and 1.35 V voltage, so it can populate the remaining slots without changing BIOS settings.
Check the BIOS memory information or run a tool such as dmidecode or CPU-Z; they will report 1600 MT/s, registered ECC type and 1.35 V for this DIMM.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?