Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Compact high-voltage DC-DC module with 12V input and 0 to -2kV output

Analog Technologies

Analog Technologies High Voltage Power Supply 0 to -2kV 1mA 12V Input

SKU CH-7ACS-ZQ1W0

Compact DC-DC converter delivers adjustable 0 to -2 kV at 1 mA from a 12 V supply

  • TypeHigh Voltage Power Supply
  • 0 to -2 kV adjustable output covers wide high-voltage needs
  • 12 V DC input enables simple low-voltage integration
  • 5 V reference voltage with ±0.05 V accuracy supports precise control
  • 50 to 240 mA input current range suits varying load conditions
  • Electronic shutdown control adds fast protection for sensitive applications

High-voltage DC-DC module for precision equipment

This compact converter delivers 0 to -2 kV at up to 1 mA from a 12 V supply, making it suitable for laboratory instruments such as X-ray sources, spectrometers and electrospinning rigs. Engineers integrating high-voltage bias into analytical or deposition systems can use the 0–5 V control input to set output voltage across the full span. Electronic shutdown provides a fast inhibit function without cycling the main rail.

Control interface limits and input requirements

The module accepts a 12 V input with a tolerance of ±1 V and draws between 50 mA and 240 mA depending on load. Output voltage follows a 0–5 V control signal linearly, while an internal 5 V reference holds ±0.05 V accuracy for calibration. No isolation or monitoring pins beyond the control and shutdown lines are documented, so system designers must provide their own feedback if closed-loop regulation is required.

Replaces bulkier rack supplies

The board-level form factor eliminates the need for a separate high-voltage chassis when retrofitting capillary electrophoresis, sputter coating or particle-accelerator subsystems. It is not a substitute for supplies needing positive polarity, currents above 1 mA or voltages beyond 2 kV, nor does it suit applications requiring galvanic isolation between control and output grounds.

Акценти

  • 0 to -2 kV adjustable output covers wide high-voltage needs
  • 12 V DC input enables simple low-voltage integration
  • 5 V reference voltage with ±0.05 V accuracy supports precise control
  • 50 to 240 mA input current range suits varying load conditions
  • Electronic shutdown control adds fast protection for sensitive applications

Спецификации

TypeHigh Voltage Power Supply

Въпроси за този артикул

How do I set the output voltage between 0 and -2 kV?

Apply a control voltage from 0 to 5 V to the CTRL pin; the output tracks linearly across the full span.

What load can the -2 kV rail actually drive?

The module delivers up to 1 mA at the maximum negative output voltage.

What does the 12 V input requirement mean for my power source?

The supply accepts 12 V ± 1 V and draws between 50 mA and 240 mA depending on output load.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.