Bitspower
Bitspower BPTA-NJORD120-DRGB 120mm DRGB case fan
- 1 Fan
- Case Fan
10,99 щ.д.
0.0001417BTC
В наличност
Bitspower
Bitspower Touchaqua NJORD II 120 PWM Digital RGB Case Fan 5-Pack White
A five-pack of 120 mm PWM case fans with addressable RGB lighting, running 800-1800 RPM at 25-28 dBA and delivering 50-53 CFM airflow
- TypeCase Fan
- CompatibilityCase
- Fan Size120mm
- RPM800~1800
- Air Flow50~53 CFM
- Noise Level25~28 dba
Fan Size 120mm
- 140mm
- 120mm
Зачертаните версии съществуват, но не се предлагат тук.
Model NJORD II
- NJord Dual Fin
- NJORD II
Зачертаните версии съществуват, но не се предлагат тук.
- PWM control adjusts 800-1800 RPM for targeted cooling
- Digital RGB LEDs sync with ASUS AURA, GIGABYTE Fusion, MSI Mystic Light, ASRock Polychrome, Razer Chroma
- Vibration rubber pads on four corners reduce noise to 25-28 dBA
- Five fans plus controller and hub enable 10-fan PWM daisy-chain
- 50-53 CFM airflow at 30,000-hour rated lifespan
Five-pack 120 mm PWM fans
This set contains five 120 mm case fans with 4-pin PWM control and addressable digital RGB LEDs. Each unit spins between 800 and 1800 RPM and delivers 50 to 53 CFM of airflow. The fans are finished in white and include vibration-damping rubber pads on all four corners. They are designed for standard 120 mm mounting points in PC cases.
Sustained-load behaviour
At full speed the fans produce 25 to 28 dBA while moving up to 53 CFM across a radiator or case mesh. The 9-blade impeller and PWM curve keep noise predictable during long gaming or rendering sessions. Rated lifetime is 30,000 hours of continuous operation. A supplied PWM hub lets the motherboard coordinate up to ten fans from a single header.
Compatibility checklist
Verify that your case has five free 120 mm mounting locations and that your motherboard offers a 4-pin PWM header plus a 5 V 3-pin addressable RGB header. The included RGB controller requires a 5 V ARGB connection certified for ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light, ASRock Polychrome and Razer Chroma. Fan power draws 12 V DC while LEDs use 5 V DC.
Акценти
- PWM control adjusts 800-1800 RPM for targeted cooling
- Digital RGB LEDs sync with ASUS AURA, GIGABYTE Fusion, MSI Mystic Light, ASRock Polychrome, Razer Chroma
- Vibration rubber pads on four corners reduce noise to 25-28 dBA
- Five fans plus controller and hub enable 10-fan PWM daisy-chain
- 50-53 CFM airflow at 30,000-hour rated lifespan
Спецификации
| Brand | Bitspower |
|---|---|
| Model | BPTA-NJORD120-DRGB-5 |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| RPM | 800~1800 |
| Air Flow | 50~53 CFM |
| Noise Level | 25~28 dba |
| Power Connector | 4 Pin |
| Color | White |
| LED | DRGB |
| Dimensions | 120x120x25mm |
Други версии на този модел
2 още от същата серия
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
Bitspower
Bitspower BPTA-NJORD120-DRGB-3 case fan 3-pack 120mm PWM DRGB white
- 3 Fans
- Case Fan
36,99 щ.д.
0.00047693BTC
В наличностВъпроси за този артикул
How loud are the five 120 mm fans at their top 1800 RPM speed?
Each fan runs at 25–28 dBA at maximum speed, so the five-pack stays in that range when all units spin at 1800 RPM.
What motherboard headers do I need to control both PWM speed and digital RGB on all five fans?
You need one 4-pin PWM header for fan speed and one 5 V addressable RGB header (3-pin) for the daisy-chained DRGB lighting.
Can I run these 120 mm fans on an older motherboard that only offers 3-pin voltage control and 12 V RGB?
The 4-pin PWM connector works in 3-pin mode for voltage control, but the 5 V DRGB LEDs require a 5 V addressable header — 12 V RGB headers are not compatible.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 щ.д.
0.00001057BTC
В наличност