Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Green 288-pin DDR4 server memory module with black chips and silver contacts

Brute Networks

Brute Networks 64GB DDR4-2933 4Rx4 Load Reduced P19044-H21 server RAM

SKU CH-18MK-KPVG9

HPE-compatible 64 GB DDR4-2933 load-reduced ECC server module, part P19044-H21, 4Rx4 at 1.2 V

  • Capacity64GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 64GB capacity supports memory-intensive workloads
  • DDR4-2933 speed delivers 23400 MT/s bandwidth
  • Load Reduced 4Rx4 design reduces electrical load per channel
  • 20V operation lowers power draw per module
  • 100% HPE compatible with major-brand Samsung, SK Hynix or Micron chips

64GB DDR4-2933 Load Reduced Server Memory

This 64GB DDR4-2933 module is built for HPE server environments that require high-density registered memory. It operates at PC4-23400 speed with a 1.20V supply and uses a 4Rx4 Load Reduced organisation to maximise capacity per slot. The 288-pin form factor fits standard DDR4 server DIMM sockets.

Installing in matched HPE slots

Installation follows standard DDR4 DIMM procedure: align the notch, press firmly until the ejectors click, and populate slots per the server manual for the correct rank interleaving. Load Reduced modules place less electrical load on the memory bus, so mixing them with standard RDIMMs in the same channel is not supported and will prevent boot. All modules in an order are identically matched to avoid timing mismatches.

Suits HPE capacity upgrades

This module suits administrators expanding memory in compatible HPE platforms using the P19044-H21 part number where 64GB density and Load Reduced signalling are qualified. It is not for systems that only accept standard RDIMMs or unbuffered UDIMMs, nor for consumer desktop boards that lack ECC and registered buffer support. Buyers needing lower densities or different rank configurations should verify their server's qualified vendor list before ordering.

Акценти

  • 64GB capacity supports memory-intensive workloads
  • DDR4-2933 speed delivers 23400 MT/s bandwidth
  • Load Reduced 4Rx4 design reduces electrical load per channel
  • 20V operation lowers power draw per module
  • 100% HPE compatible with major-brand Samsung, SK Hynix or Micron chips

Спецификации

BrandHPE
Capacity64GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMajor Brand Chipset

Въпроси за този артикул

How can I confirm the 64GB DDR4-2933 module is running at the correct 2933MHz speed after installation?

Check the memory speed in the server BIOS or use a system information tool such as CPU-Z to verify the module reports DDR4-2933 (PC4-23400) at 1.20V.

What is included with the P19044-H21 module and do I need any extra parts to install it?

The box contains the 64GB 288-pin DDR4 SDRAM load-reduced DIMM only; no additional cables, brackets or software are required for installation in a compatible HPE server slot.

Which capacity and rank version should I choose for a server that supports 4Rx4 load-reduced DDR4-2933 memory?

Select this 64GB 4Rx4 PC4-23400 module; it matches the 2933MHz speed, 1.20V voltage and 288-pin form factor specified for HPE systems requiring load-reduced ECC memory.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.