Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
A slim pink 3D printing pen with an OLED screen and stainless-steel body, 170 mm long and 14 mm wide

DEWANG

DEWANG 3D Printing Pen OLED Pink 1.75mm 0.7mm 170mm 41g

SKU CH-CDPT-8XW26

A lightweight 1.75 mm filament pen with an OLED screen, six speed levels, instant PLA/ABS switching and a ceramic nozzle that cools rapidly

  • Type3D Printing Pen
  • ColorPink
  • Body MaterialStainless Steel
  • Filament Diameter1.75mm
  • Jets Diameter0.7mm
  • Max Working Speed6 Levels

Color Pink

  • Slim 1.4 cm diameter fits small hands
  • Ceramic nozzle stays cool to prevent burns
  • OLED screen shows temperature from 130 to 230 degrees
  • Six speed levels adjust flow for detail or fill
  • Switch PLA and ABS modes without restarting

Ultra-Slim 3D Printing Pen with OLED Display

The DEWANG 3D printing pen is a handheld extruder for makers, students and hobbyists who want to draw three-dimensional structures in PLA or ABS. Its stainless-steel body measures 1.4 cm in diameter and weighs 41 g, making it comfortable for extended creative sessions. An OLED screen shows the active temperature and speed level at a glance.

Upgrade from Basic Pens Without Temperature Control

Unlike entry-level models that require a full restart to change filament type, this pen switches between PLA at 190 °C and ABS at 210 °C instantly via button control. The ceramic nozzle and built-in fan cool extruded material rapidly so strands hold shape in mid-air. Six speed levels let users match flow to project complexity without power-cycling the device.

Handles 1.75 mm Filament with 103-Hour Motor Life

The 0.7 mm nozzle accepts standard 1.75 mm PLA or ABS spools and operates across a 130–230 °C range for fine temperature tuning. A detachable nozzle design simplifies clearing clogs or swapping tips. The internal motor is rated for 103 hours of continuous use, while the included 3-meter PLA filaments provide starter material for immediate projects.

Акценти

  • Slim 1.4 cm diameter fits small hands
  • Ceramic nozzle stays cool to prevent burns
  • OLED screen shows temperature from 130 to 230 degrees
  • Six speed levels adjust flow for detail or fill
  • Switch PLA and ABS modes without restarting

Спецификации

Type3D Printing Pen
ColorPink
Body MaterialStainless Steel
Filament Diameter1.75mm
Jets Diameter0.7mm
Max Working Speed6 Levels
Operation TemperatureABS 210?, PLA 190?
Package Contents1 X 3D Printing Pen
1 X Power Adapter
1 X USB Cable
3 X 3 Meters PLA Filaments
1 X Screwdriver
1 X Manual
Dimensions170*14*14mm
Weight41g

Други версии на този модел

3 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

What nozzle diameter and filament size does the DEWANG pen use?

The pen has a 0.7 mm ceramic nozzle and accepts 1.75 mm ABS or PLA filament.

How do you switch between PLA and ABS modes on the pen?

Press the mode button to toggle between PLA at 190 °C and ABS at 210 °C without powering the pen off.

When should the ceramic nozzle be replaced?

Replace the detachable ceramic nozzle when extrusion becomes uneven or the tip shows visible wear after extended use.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.