Eluktronics
Eluktronics Eluktro Pro 250GB SATA 2.5" internal SSD
A 250GB 2.5-inch SATA internal SSD using MLC NAND with sequential read speeds up to 560MB/s and write speeds up to 515MB/s
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form Factor2.5"
- Capacity250GB
- Memory ComponentsMLC
- InterfaceSATA III
- Up to 560MB/s sequential read accelerates system boot and app loading
- Up to 515MB/s sequential write speeds up large-file transfers
- MLC NAND provides higher endurance for sustained workloads
- 7mm 2.5″ form factor fits laptops and ultrabooks without a bracket
- Shock resistance rated to 1500G protects data in mobile use
250 GB SATA SSD for everyday PCs
The Eluktronics Eluktro Pro is a 2.5 inch internal solid state drive built with MLC flash and a SATA III interface. It fits standard 7 mm drive bays in laptops and desktops, offering 250 GB of capacity for operating systems, applications and data.
Fits 7 mm bays and standard SATA ports
The drive measures 100.2 by 70.0 by 7.0 mm and weighs 79 g, so it slides into thin ultrabooks or desktop trays without a bracket. A SATA 3.0 connection supplies both data and power, while backwards compatibility with 3 Gb/s and 1.5 Gb/s hosts keeps older systems working.
Steady speeds and low heat under load
Sequential reads reach 560 MB/s and writes reach 515 MB/s, with 4K random write IOPS up to 90 000. Power draw stays at 1.0 W idle and 3.0 W active, and the drive is rated for 0 to 70 °C operation with a 1.5 million hour MTBF and 1500 G shock resistance.
Акценти
- Up to 560MB/s sequential read accelerates system boot and app loading
- Up to 515MB/s sequential write speeds up large-file transfers
- MLC NAND provides higher endurance for sustained workloads
- 7mm 2.5″ form factor fits laptops and ultrabooks without a bracket
- Shock resistance rated to 1500G protects data in mobile use
Спецификации
| Model | Eluktro Pro |
|---|---|
| Part Number | TRO-250GB-PRO |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 250GB |
| Memory Components | MLC |
| Interface | SATA III |
Въпроси за този артикул
At what temperature does the drive hit its operating limit under sustained load?
The operating temperature range tops out at 70 °C, so sustained workloads should stay below that threshold.
How much power and heat should I expect when the drive runs all day?
Active power draw is 3.0 W and idle is 1.0 W, giving low heat output for continuous operation.
What host interface must my system provide for this 2.5" drive to work?
A SATA III (6 Gb/s) port is required; the drive is backward compatible with SATA 3 Gb/s and 1.5 Gb/s.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
