Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Compact black micro-tower with walnut front I/O panel, mesh front, three 120mm fans, 395mm GPU support, 360mm radiator clearance

GAMDIAS Technology

GAMDIAS Technology GD-ATHENA M4M WOOD PC case

SKU CH-9YM9-4ZTBY MPN GD-ATHENA M4M WOOD

A compact micro-tower case with a real walnut wood front I/O panel, perforated mesh airflow, three pre-installed 120mm NOTUS M1 PWM fans, dual 360mm radiator support, front-mounted ATX PSU layout.

  • ColorBlack
  • Power Supply MountedFront
  • Motherboard CompatibilityMicro ATX
  • Dust FiltersBottom
  • Internal 3.5" Drive Bays1
  • Internal 2.5" Drive Bays2

Model ATHENA M4M WOOD

  • ATHENA M4M WOOD
  • ATHENA M4M WOOD + 650W Gold PSU
  • ATHENA M4M WOOD + 850W Gold PSU
  • ATHENA M4M

Зачертаните версии съществуват, но не се предлагат тук.

  • Real walnut front I/O panel adds natural warmth to the build
  • Three pre-installed 120mm PWM fans deliver up to 57.56 CFM airflow
  • Fits graphics cards up to 395mm for high-end performance
  • Supports dual 360mm radiators for advanced liquid cooling
  • Front-mounted ATX PSU layout simplifies cable routing

Compact Micro-Tower with Real Walnut Front Panel

The GAMDIAS Technology GD-ATHENA M4M WOOD is a micro-tower chassis built for Micro ATX motherboards. It features a fully perforated mesh front panel paired with a distinctive real walnut wood front I/O panel. Three 120mm NOTUS M1 fans are pre-installed, delivering airflow up to 57.56 CFM. The case supports dual 360mm radiators and graphics cards up to 395mm in length.

Front-Mounted PSU Eases Cable Routing

The power supply mounts at the front of the chassis with connectors oriented downward, simplifying cable management. A PSU shroud keeps the interior tidy and an extension cable is included for rear power connection. Builders should verify their ATX power supply does not exceed 150mm in length. The bottom dust filter helps keep the system clean but requires periodic removal for cleaning.

Suits Small-Form-Factor Builds

This case suits enthusiasts who want a compact Micro ATX build with extensive liquid-cooling support and a unique wood accent. It accommodates one 3.5-inch drive and two 2.5-inch drives. Builders needing more than two 2.5-inch bays or those planning to use an E-ATX motherboard should look at a larger chassis.

Акценти

  • Real walnut front I/O panel adds natural warmth to the build
  • Three pre-installed 120mm PWM fans deliver up to 57.56 CFM airflow
  • Fits graphics cards up to 395mm for high-end performance
  • Supports dual 360mm radiators for advanced liquid cooling
  • Front-mounted ATX PSU layout simplifies cable routing

Спецификации

ColorBlack
Power Supply MountedFront
Motherboard CompatibilityMicro ATX
Dust FiltersBottom
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays2
Front PortsUSB 3.0 / Audio
Max GPU Length395 mm
Max CPU Cooler Height175 mm
Max PSU Length150 mm
Dimensions446 x 235 x 347mm
Тегло на пратката6.58 kg
Размери на опаковката508 × 396 × 292 mm

Други версии на този модел

1 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

How can I confirm the three included NOTUS M1 fans are spinning at their rated 57.56 CFM after I finish the build?

Connect the fans to the supplied 8-port PWM ARGB hub, power the system, and verify RPM in BIOS or monitoring software; the fans are pre-installed and tuned for that airflow figure.

What comes in the box and which parts such as a power supply or motherboard must I purchase separately?

The case ships with three 120mm NOTUS M1 fans, an 8-port PWM ARGB hub, a PSU extension cable, and a real walnut wood front I/O panel; you must buy the motherboard, CPU cooler, GPU, PSU, and storage drives yourself.

Which version of the ATHENA M4M WOOD should I choose if I need to fit a 395 mm graphics card and a 360 mm radiator?

This single model already supports GPUs up to 395 mm and dual 360 mm radiators, so no alternative version is required for those clearances.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.