GUDGA
GUDGA GVR 256GB NVMe internal SSD
- Internal Solid Stat…
- Consumer
41,99 щ.д.
0.00053271BTC
В наличност
GUDGA
GUDGA GVR 512GB PCIe 3.0 x4 NVMe internal SSD
512 GB NVMe internal SSD with PCIe 3.0 x4 interface, sequential reads up to 3,000 MB/s and 300 TBW endurance
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Capacity512GB
- Memory Components3D TLC
- InterfacePCI-Express 3.0 x4
- ProtocolNVMe 1.3
- Fast boot and load times with up to 24000 MB/s sequential read
- Large project files write quickly at up to 14400 MB/s sequential write
- 300 TBW endurance rating supports heavy daily workloads
- Operates reliably from 0 °C to 70 °C
- Compact M.2 2280 form factor fits standard slots
GUDGA GVR 512GB NVMe SSD
This GUDGA GVR drive is a 512GB internal solid state drive built on 3D TLC memory. It connects through a PCIe 3.0 x4 interface using the NVMe 1.3 protocol. The M.2 2280 form factor measures 80mm by 22mm with a 2.20mm height and weighs 26g. It is designed for consumer workloads in desktops and laptops.
Upgrade from older storage
The drive delivers sequential reads up to 24000 MBps and writes up to 14400 MBps with a seek time of .01ms. Its 300TB TBW rating supports heavy write workloads over the drive's life. The jump is worth it when faster boot times, quicker application launches and sustained throughput for large files are required.
Build fit and requirements
The single-sided M.2 2280 module needs a motherboard slot wired for PCIe 3.0 x4 and NVMe 1.3. No cable or 2.5-inch bay is required, freeing internal space and simplifying cable routing. Operating temperature ranges from 0°C to 70°C, with storage tolerance from -20°C to 85°C. A mounting screw is included.
Акценти
- Fast boot and load times with up to 24000 MB/s sequential read
- Large project files write quickly at up to 14400 MB/s sequential write
- 300 TBW endurance rating supports heavy daily workloads
- Operates reliably from 0 °C to 70 °C
- Compact M.2 2280 form factor fits standard slots
Спецификации
| Brand | GUDGA |
|---|---|
| Series | GVR |
| Model | GVR-xxx-2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Capacity | 512GB |
| Memory Components | 3D TLC |
| Interface | PCI-Express 3.0 x4 |
| Protocol | NVMe 1.3 |
| Max Sequential Read | Up to 24000 MBps |
| Max Sequential Write | Up to 14400 MBps |
| Seek Time | 0.01ms |
| Terabytes Written (TBW) | 300TB |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +85°C |
| Height | 2.20mm |
| Width | 22mm |
| Depth | 80mm |
| Weight | 26g |
| Package Content | 1 x SSD; 1 x Screw |
| Manufacturer Recertified | Yes |
Други версии на този модел
3 още от същата серия
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
GUDGA
GUDGA GVR 1TB PCIe 3.0 x4 NVMe internal SSD
- Internal Solid Stat…
- Consumer
113,99 щ.д.
0.00144615BTC
В наличност
GUDGA
GUDGA GVR Series 2TB NVMe internal SSD
- Internal Solid Stat…
- Consumer
261,99 щ.д.
0.00332378BTC
В наличностВъпроси за този артикул
Will the 2280 M.2 form factor and 2.20mm height clear my laptop's M.2 slot and heatsink?
The drive measures 22mm wide, 80mm long and 2.20mm thick, matching the standard M.2 2280 single-sided profile that fits most laptop and desktop slots.
What is the correct way to secure the drive, and which step do builders often skip?
Insert the drive at an angle into the PCIe 3.0 x4 NVMe 1.3 slot, press it flat, and fasten the included screw into the motherboard standoff; the step often missed is using that screw instead of leaving the drive floating.
When should I plan to replace the drive based on its 300TB endurance rating?
With 300TBW of 3D TLC flash, the drive is warrantied for 300 terabytes written; typical consumer workloads write far less per year, so replacement is usually driven by capacity needs rather than wear.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
