Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Black rectangular wall-plug power adapter with attached DC output cable and barrel connector

HitLights

HitLights 12V 8A 96W DC Power Supply

SKU CH-5RDM-TQXAV

Converts 120V AC to 12V DC at 96W, powers 72 feet of 600 LED 3528 strip via 5.5 x 2.1mm jack, UL-listed

  • TypeAT
  • Delivers 12 V DC for LED strips and low-voltage gear
  • Plugs straight into a 120 V wall outlet with no hardwiring needed
  • Powers up to 72 feet of 600 LED 3528 strip at 96 W
  • Includes 5.5 × 2.1 mm DC jack for dimmers or controllers
  • UL-listed safety certification for indoor installations

12V 96W desktop power supply

This desktop adapter converts 120V AC mains power into a regulated 12V DC output rated at 96 watts and 8 amps. It is UL listed and intended for indoor LED strip installations, security cameras, audio equipment and similar low voltage devices. The unit ships new and includes an output lead terminated with a standard 5.5 x 2.1mm barrel jack, positive tip. No hardwiring or soldering is required to put it into service.

Check your load and connector before ordering

Verify that the total connected load does not exceed 96 watts or 8 amps at 12 volts. The supplier notes this unit can run up to 72 feet of 600 LED 3528 strip as a reference point. Confirm that your strip, controller or dimmer accepts a 5.5 x 2.1mm DC plug with positive tip polarity. Ensure the installation location is indoors and has access to a standard North American wall outlet supplying 120V AC.

Wall plug design with fixed output cable

The power supply plugs directly into a wall socket, so no separate mains lead or electrician is needed. Its fixed output cable ends in the 5.5 x 2.1mm barrel connector, which mates with most common LED controllers and dimmers. The enclosure is built for indoor use only and carries UL listing for safety compliance. Allow space around the adapter for ventilation during extended operation.

Акценти

  • Delivers 12 V DC for LED strips and low-voltage gear
  • Plugs straight into a 120 V wall outlet with no hardwiring needed
  • Powers up to 72 feet of 600 LED 3528 strip at 96 W
  • Includes 5.5 × 2.1 mm DC jack for dimmers or controllers
  • UL-listed safety certification for indoor installations

Спецификации

TypeAT

Въпроси за този артикул

What comes in the box and what must I buy separately?

The unit includes an output cable with a 5.5 x 2.1 mm DC jack (positive tip) for connecting to your LED strip, controller, or dimmer. LED strips, controllers, dimmers, and any mounting hardware are sold separately.

Which version or capacity should I choose for my project?

This single model delivers 12 V DC at 8 A for a total of 96 W. It is rated to run up to 72 feet of 600 LED 3528 strip. Choose it when your total load stays within 96 W.

What does the 96 W rating mean once the supply is installed?

It means the adapter can continuously provide up to 96 W (8 A at 12 V) to your LED installation, powering up to 72 feet of 600 LED 3528 strip or equivalent 12 V devices such as cameras and AV gear.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.