SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
HPE
A 4 TB 3.5" internal hard drive spinning at 7200 RPM with a SATA 6.0 Gb/s interface for high-capacity server storage
The HPE 801888-B21 is a 4 TB internal hard drive with a SATA 6.0 Gb/s interface and a 7200 RPM spindle speed. Its 3.5 inch form factor fits standard desktop and server drive bays. The drive is supplied new and intended for non-hot-plug installation.
This drive suits users who need economical high-capacity storage for non-mission-critical workloads such as file archives, backups or media libraries. It is not designed for hot-swap bays, so builders who require hot-plug capability should look elsewhere. It also targets traditional hard-drive workloads rather than solid-state performance tiers.
The single specification that determines compatibility is the SATA 6.0 Gb/s interface; the system must provide a matching SATA port and 3.5 inch mounting space. The 7200 RPM speed and 4 TB capacity follow from that interface choice. Verify the host supports SATA 6.0 Gb/s before purchase.
| Brand | HP |
|---|---|
| Model | 801888-B21 |
| Interface | SATA 6.0Gb/s |
| Capacity | 4TB |
| NAND Flash Memory Type | Hard Drive |
| RPM | 7200 RPM |
| Average Latency | 6Gb/s |
| Features | Do you have non-mission critical applications that require economical high capacity and reliability hard disk drives? HP SATA Hard Drives are built for reliability and larger capacity needs for today's non-mission critical server applications and storage environments. These high-capacity drives provide the lowest $/GB, and the best price advantage for non-mission critical applications with low workloads of 40% or less. HP SATA Hard Drives are available in both Large Form Factor (LFF) (3.5-inch) and Small Form Factor (SFF) (2.5-inch) and ship with a standard one year warranty. All HP |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
| Тегло на пратката | 4.54 kg |
| Размери на опаковката | 246 × 201 × 165 mm |
Yes, the drive requires a standard 3.5-inch internal bay and a SATA 6.0Gb/s data connection plus a SATA power connector from the power supply.
The drive is backward compatible with SATA 3.0Gb/s controllers, so it will operate at the slower link speed when paired with older drives on the same bus.
Check the negotiated link speed in the system BIOS or using a tool such as smartctl; it should report 6.0Gb/s when the controller supports it.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?